It is currently Wed 23 Oct 2019, 11:21 pm

All times are UTC + 10 hours




Post new topic Reply to topic  [ 567 posts ]  Go to page Previous  1 ... 21, 22, 23, 24, 25, 26, 27 ... 29  Next
Author Message
 Post subject: Re: SIVART's new toy
PostPosted: Thu 05 May 2016, 8:09 pm 
Offline
This forum is my life
This forum is my life
User avatar

Joined: Fri 09 Jun 2006, 11:35 pm
Posts: 3642
Location: Adelaide South Australia
Gender: Male
Your car: DOHC 2.3 VR4 85 AB GSR
Immaculate Stock 86 AC GSR
OK, I'll try and explain,
The map sensor (also called pressure sensor) is located on the firewall to the right hand side of the igniter or E101.

The yellow wire is the pressure sensor back to the ECU as part of the loom, if you cut this wire and bridge a fuel cut defender in its place you can raise the fuel cut limit. (AB's actually fuel cut at 14 psi so you can set it higher by lowering the FCD voltage)

The FCD stops the sensor from reaching 5 volt and cutting the ignition at the E101, guys always say its a "fuel" cut but its not.

See here for the wiring diagram.

viewtopic.php?f=7&t=16157


Top
 Profile  
Reply with quote  
 Post subject: Re: SIVART's new toy
PostPosted: Fri 06 May 2016, 1:55 am 
Offline
Super Cordia Guru
Super Cordia Guru
User avatar

Joined: Thu 11 Feb 2016, 11:41 am
Posts: 572
Location: sydney
Gender: Male
Your car: 1984 AB cordia turbo
the wire diagram is very small to read.
i have here pics


Attachments:
2016-05-06 01.02.12.jpg
2016-05-06 01.02.12.jpg [ 142.83 KiB | Viewed 12525 times ]
2016-05-06 01.00.11.jpg
2016-05-06 01.00.11.jpg [ 143.97 KiB | Viewed 12525 times ]
Top
 Profile  
Reply with quote  
 Post subject: Re: SIVART's new toy
PostPosted: Fri 06 May 2016, 8:06 am 
Offline
1800 CORDIA
1800 CORDIA
User avatar

Joined: Tue 14 Oct 2008, 10:39 pm
Posts: 1212
Location: Karingal , Frankston Vic
Gender: Male
Ive always done it that way , I will try yours next time, the boost gauge used to cut out , but never registed errors though

_________________
AC silver bullet in the build, 4G62T DOHC

last cordia:
Blue 88 GSR turbo AC with 62t, TD05 14B and FMIC, 104wkw on 14psi
( I WOULD LIKE IT BACK IF POSSIBLE, OLD REG SYH354 )


Top
 Profile  
Reply with quote  
 Post subject: Re: SIVART's new toy
PostPosted: Fri 06 May 2016, 6:42 pm 
Offline
Super Cordia Guru
Super Cordia Guru
User avatar

Joined: Thu 11 Feb 2016, 11:41 am
Posts: 572
Location: sydney
Gender: Male
Your car: 1984 AB cordia turbo
will this work?
http://www.ebay.com/itm/DSP-Universal-F ... 2254692541


Top
 Profile  
Reply with quote  
 Post subject: Re: SIVART's new toy
PostPosted: Fri 06 May 2016, 6:53 pm 
Offline
This forum is my life
This forum is my life
User avatar

Joined: Fri 09 Jun 2006, 11:35 pm
Posts: 3642
Location: Adelaide South Australia
Gender: Male
Your car: DOHC 2.3 VR4 85 AB GSR
Immaculate Stock 86 AC GSR
The picture only has three wires?

You need four, positive, negative, and a colour to bridge the cut yellow wire.


Top
 Profile  
Reply with quote  
 Post subject: Re: SIVART's new toy
PostPosted: Fri 06 May 2016, 7:02 pm 
Offline
Super Cordia Guru
Super Cordia Guru
User avatar

Joined: Thu 11 Feb 2016, 11:41 am
Posts: 572
Location: sydney
Gender: Male
Your car: 1984 AB cordia turbo
i see what you mean .
i'll see if i can get one cheap some where
ok i think i know how to install looks easy :D
http://www.turbosmartusa.com/wp-content ... 1/FCD2.pdf

turbosmart seems the only one,anyone know of cheaper brand


Top
 Profile  
Reply with quote  
 Post subject: Re: SIVART's new toy
PostPosted: Fri 06 May 2016, 7:52 pm 
Offline
This forum is my life
This forum is my life
User avatar

Joined: Fri 09 Jun 2006, 11:35 pm
Posts: 3642
Location: Adelaide South Australia
Gender: Male
Your car: DOHC 2.3 VR4 85 AB GSR
Immaculate Stock 86 AC GSR
Pretty sure Jaycar still make them, can't buy them in stores anymore only over the net...........but you have to make it yourself.........not hard.

Clips the voltage at 3.9 volt, perfect for the cordia, have made quite a few now, and at $20 it's cheap.

http://www.jaycar.com.au/Kits,-Science- ... e/p/KC5439


Top
 Profile  
Reply with quote  
 Post subject: Re: SIVART's new toy
PostPosted: Sat 07 May 2016, 12:05 am 
Offline
Super Cordia Guru
Super Cordia Guru
User avatar

Joined: Thu 11 Feb 2016, 11:41 am
Posts: 572
Location: sydney
Gender: Male
Your car: 1984 AB cordia turbo
man your the best thanks
there out of Stock contacted them if there still making them will see what happens
can't believe they sell Car Turbo Timer with Case and Independent Electronic Boost Controller Kit .


Top
 Profile  
Reply with quote  
 Post subject: Re: SIVART's new toy
PostPosted: Mon 16 May 2016, 2:25 pm 
Offline
1800 CORDIA
1800 CORDIA
User avatar

Joined: Tue 14 Oct 2008, 10:39 pm
Posts: 1212
Location: Karingal , Frankston Vic
Gender: Male
here is my Sunday , Painting outside , with large winds ...lol

Image

Image

_________________
AC silver bullet in the build, 4G62T DOHC

last cordia:
Blue 88 GSR turbo AC with 62t, TD05 14B and FMIC, 104wkw on 14psi
( I WOULD LIKE IT BACK IF POSSIBLE, OLD REG SYH354 )


Top
 Profile  
Reply with quote  
 Post subject: Re: SIVART's new toy
PostPosted: Mon 16 May 2016, 7:19 pm 
Offline
Super Cordia Guru
Super Cordia Guru
User avatar

Joined: Thu 11 Feb 2016, 11:41 am
Posts: 572
Location: sydney
Gender: Male
Your car: 1984 AB cordia turbo
looks good the old acrylic.
hope paint don't peal off,when you pull masking from handles and molds


Top
 Profile  
Reply with quote  
 Post subject: Re: SIVART's new toy
PostPosted: Tue 17 May 2016, 12:06 pm 
Offline
1800 CORDIA
1800 CORDIA
User avatar

Joined: Tue 14 Oct 2008, 10:39 pm
Posts: 1212
Location: Karingal , Frankston Vic
Gender: Male
all the black parts like the handles etc are plastic dip paint ...lol , trick too with taking the tape off , is do it while its slightly wet still and it never chips away, or trim with a stanley knife before

I have to stick the moulds and badges on too, ( GLi badge )

I did the paint abit too smooth , so I roughed it up with random spraying , now to get the car dirty so it looks old

_________________
AC silver bullet in the build, 4G62T DOHC

last cordia:
Blue 88 GSR turbo AC with 62t, TD05 14B and FMIC, 104wkw on 14psi
( I WOULD LIKE IT BACK IF POSSIBLE, OLD REG SYH354 )


Top
 Profile  
Reply with quote  
 Post subject: Re: SIVART's new toy
PostPosted: Mon 27 Jun 2016, 9:36 am 
Offline
1800 CORDIA
1800 CORDIA
User avatar

Joined: Tue 14 Oct 2008, 10:39 pm
Posts: 1212
Location: Karingal , Frankston Vic
Gender: Male
got the evo out for the weekend, ended up at mt donna buang, 1 deg too

Image

_________________
AC silver bullet in the build, 4G62T DOHC

last cordia:
Blue 88 GSR turbo AC with 62t, TD05 14B and FMIC, 104wkw on 14psi
( I WOULD LIKE IT BACK IF POSSIBLE, OLD REG SYH354 )


Top
 Profile  
Reply with quote  
 Post subject: Re: SIVART's new toy
PostPosted: Mon 27 Jun 2016, 12:17 pm 
Offline
1800 CORDIA
1800 CORDIA
User avatar

Joined: Fri 03 Oct 2003, 6:28 pm
Posts: 1077
Location: Victoria
Nice photo.


Top
 Profile  
Reply with quote  
 Post subject: Re: SIVART's new toy
PostPosted: Tue 28 Jun 2016, 8:10 am 
Offline
1800 CORDIA
1800 CORDIA
User avatar

Joined: Tue 14 Oct 2008, 10:39 pm
Posts: 1212
Location: Karingal , Frankston Vic
Gender: Male
thanks Goran, Im a leaner with the camera still but getting there

_________________
AC silver bullet in the build, 4G62T DOHC

last cordia:
Blue 88 GSR turbo AC with 62t, TD05 14B and FMIC, 104wkw on 14psi
( I WOULD LIKE IT BACK IF POSSIBLE, OLD REG SYH354 )


Top
 Profile  
Reply with quote  
 Post subject: Re: SIVART's new toy
PostPosted: Tue 25 Oct 2016, 10:56 am 
Offline
1800 CORDIA
1800 CORDIA
User avatar

Joined: Tue 14 Oct 2008, 10:39 pm
Posts: 1212
Location: Karingal , Frankston Vic
Gender: Male
some progress on the sleeper

fixed,

Rad support was cracked
Fuel filter was held on by a cable tie
wireS going between inlet and head ( massive air leak )
doing a different intercooler and piping ( cooler under the rad support )
new Grille
dump pipe nuts loose


still got to do,

trim bonnet spider for the timing belt cover
fit new dash pad
ralliart rear end bushes
fit bonnet locks
gear shifter bushes + cable bushes
replace fuel pump and re earth
civic radiator and 14 inch fan

needed,
looking for a Front bar reo

Image

_________________
AC silver bullet in the build, 4G62T DOHC

last cordia:
Blue 88 GSR turbo AC with 62t, TD05 14B and FMIC, 104wkw on 14psi
( I WOULD LIKE IT BACK IF POSSIBLE, OLD REG SYH354 )


Top
 Profile  
Reply with quote  
 Post subject: Re: SIVART's new toy
PostPosted: Tue 25 Oct 2016, 11:04 am 
Offline
1800 CORDIA
1800 CORDIA
User avatar

Joined: Tue 14 Oct 2008, 10:39 pm
Posts: 1212
Location: Karingal , Frankston Vic
Gender: Male
cooler fitment to suite the GL front bar

Image


end look of fitment

Image

_________________
AC silver bullet in the build, 4G62T DOHC

last cordia:
Blue 88 GSR turbo AC with 62t, TD05 14B and FMIC, 104wkw on 14psi
( I WOULD LIKE IT BACK IF POSSIBLE, OLD REG SYH354 )


Top
 Profile  
Reply with quote  
 Post subject: Re: SIVART's new toy
PostPosted: Thu 08 Dec 2016, 12:16 pm 
Offline
1800 CORDIA
1800 CORDIA
User avatar

Joined: Tue 14 Oct 2008, 10:39 pm
Posts: 1212
Location: Karingal , Frankston Vic
Gender: Male
Image

_________________
AC silver bullet in the build, 4G62T DOHC

last cordia:
Blue 88 GSR turbo AC with 62t, TD05 14B and FMIC, 104wkw on 14psi
( I WOULD LIKE IT BACK IF POSSIBLE, OLD REG SYH354 )


Last edited by S1VART on Thu 08 Dec 2016, 1:55 pm, edited 1 time in total.

Top
 Profile  
Reply with quote  
 Post subject: Re: SIVART's new toy
PostPosted: Thu 08 Dec 2016, 12:42 pm 
Offline
This forum is my life
This forum is my life
User avatar

Joined: Fri 09 Jun 2006, 11:35 pm
Posts: 3642
Location: Adelaide South Australia
Gender: Male
Your car: DOHC 2.3 VR4 85 AB GSR
Immaculate Stock 86 AC GSR
Your post is showing "photo not found"....WTF?


Top
 Profile  
Reply with quote  
 Post subject: Re: SIVART's new toy
PostPosted: Thu 08 Dec 2016, 12:45 pm 
Offline
1800 CORDIA
1800 CORDIA
User avatar

Joined: Tue 14 Oct 2008, 10:39 pm
Posts: 1212
Location: Karingal , Frankston Vic
Gender: Male
really , I can see it though , I will check the settings

_________________
AC silver bullet in the build, 4G62T DOHC

last cordia:
Blue 88 GSR turbo AC with 62t, TD05 14B and FMIC, 104wkw on 14psi
( I WOULD LIKE IT BACK IF POSSIBLE, OLD REG SYH354 )


Top
 Profile  
Reply with quote  
 Post subject: Re: SIVART's new toy
PostPosted: Thu 08 Dec 2016, 1:56 pm 
Offline
1800 CORDIA
1800 CORDIA
User avatar

Joined: Tue 14 Oct 2008, 10:39 pm
Posts: 1212
Location: Karingal , Frankston Vic
Gender: Male
I repatched the pic just incase bud

_________________
AC silver bullet in the build, 4G62T DOHC

last cordia:
Blue 88 GSR turbo AC with 62t, TD05 14B and FMIC, 104wkw on 14psi
( I WOULD LIKE IT BACK IF POSSIBLE, OLD REG SYH354 )


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 567 posts ]  Go to page Previous  1 ... 21, 22, 23, 24, 25, 26, 27 ... 29  Next

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron



Connect with Cordia Power on Facebook. Cordia Power 2000-2018. Cordia Forum powered by phpBB.