Cordia Forum https://www.cordiapower.com/forum/ |
|
FRONTN https://www.cordiapower.com/forum/viewtopic.php?f=12&t=12234 |
Page 1 of 9 |
Author: | FRONTN [ 19 May 2007, 20:38 ] |
Post subject: | FRONTN |
Ahh since i've been discovered i might as well show you all my top secret project from area 51 (my backyard) haha.. Anyways most of you may not know me but i've been on these forums since Nov 03 before i even got my 1st Cordia. I've purchased heaps of parts from all you forum members, even interstate and thru ebay. I had alot of problems with my first cordia and always wanted a VR4 engine. But after looking i found a VR4 engine that came with a free car lol. I ended up purchasing this car which used to belong to Zoran from geelong. Featured on fullboost. http://www.fullboost.com.au/feature_car ... Id=447&p=1 Pretty quick car.. since then i've just been trying to make her look good.. and adding extra parts. currently incomplete and haven't driven her for over a year. FRONTN Japspec VR4 4G63BT DOHC Cyclone intake manifold - Now Galant NA intake TD05 14B - Now Evo 7 RS Turbo 450cc injectors - Now 560cc (Evo Hybrid copy 600x300x70mm Intercooler - 2" hot/2.5" cold 2.5" Exhaust - Now 3" with Custom Dump, middle muffler Hiflow Cat, Veilside muffler Microtech MT8 with Handset - Now Microtech LT8S 17 x 7" White HR Racing Rims - Now 17 x 7" Buddyclub P1's +35 offset 215/40 tyres Monroe Front and rear shocks - Now Ultima (Don't Ask) Pedders lowered Springs - Now lowered King Springs Turbosmart type 2 BOV - Now Tomei Plumback Grumbly strut brace. Brakes F: Evo 2 calipers, RDA 276mm slotted rotors Brakes R: TP Magna calipers, RDA 256mm slotted rotors. Maxistop pads all round. AC Cordia interior EL Dials Power windows Momo Jet Steering wheel Momo Jet Gear knob No Stereo yet.. Let me know wat you guys think... Cheers Tim |
Author: | D3bb4 [ 20 May 2007, 02:53 ] |
Post subject: | |
looks noice. like it. you're going with a pretty crazy setup. i want them brakes. |
Author: | FRONTN [ 20 May 2007, 03:38 ] |
Post subject: | |
Thanx D3bb4.. I got them brakes all on ebay. Front GTO 4pot calipers = Sold to Brad (EVO85) [edited] tp wagon rear calipers n 276mm used discs = Cannot use & chucked out [edited] Now i need those custom brackets and slotted discs. I wish, [edited] Removed pick of GTO calipers as was sold. [edited] |
Author: | Gsr2vr4 [ 20 May 2007, 11:19 ] |
Post subject: | |
Are those red calipers really able to fit in a cordia, they look like they can stop a mach truck. |
Author: | mad_rx2 [ 20 May 2007, 17:39 ] |
Post subject: | |
Hot Hot Hot!! That thing is going to be a monster ...Love it already |
Author: | Fast_4 [ 02 Jun 2007, 10:08 ] |
Post subject: | |
man thats nice cordia...lovin it, when its gotta be back on the road ? |
Author: | FRONTN [ 09 Jun 2007, 11:37 ] |
Post subject: | |
i don't think i'll ever finish this project haha.. i'm so lazy.. and it's too cold.. I just wasted 2 weeks of annual leave.. one day it'll be worth it.. just won some fto seats on ebay for it.. = sold fto seats for evo 2 recaro's then sold and using AC interior [edited] |
Author: | DannyV [ 09 Jun 2007, 12:26 ] |
Post subject: | |
thats awesome man! very very nice! top effort |
Author: | Fast_4 [ 09 Jun 2007, 20:05 ] |
Post subject: | |
Timmeeee wrote: i don't think i'll ever finish this project haha.. i'm so lazy.. and it's too cold..
I just wasted 2 weeks of annual leave.. one day it'll be worth it.. just won some fto seats on ebay for it.. haha, i kinda had same thing but i just had to do it..i just dont feel like working on my car..it sucks working in cold your hands just get soo weak...and hurt ur self more lol but good luck with your project mate |
Author: | JiMi [ 10 Jun 2007, 09:26 ] |
Post subject: | |
looking good.... you had better get a wiggle on.. the melb cruise is creeping up fast.. hehe nice to see another ebayaholic out there j |
Author: | FRONTN [ 10 May 2008, 23:57 ] |
Post subject: | Re: FRONTN |
I haven't updated this in awhile but since this is the main update on the car i thought i'd post again.. I have finally sprayed the car.. i'm not really happy with it but oh well it's solid 2pack white so i can rub down a lil and buff it up.. so should be okay.. here's some pics.. wet paint always looks good.. |
Author: | TRQ-STR [ 11 May 2008, 02:28 ] |
Post subject: | Re: FRONTN |
yay!!!. lookin good, but u took your sweet ass time aye. ill have to come past and see it some time soon. ill come over in my new car to motivate you a little, it might speed up the processes. |
Author: | FRONTN [ 20 May 2008, 23:07 ] |
Post subject: | Re: FRONTN |
Guys take 2 of painting as i wasn't satisfied with the first job.. This time with a clear coat too. I reckon it turned out pretty good. It almost doesn't look real coz it's so shiny..(pic was taken with dried paint). Well atleast i got off my asss and done something about my car haha.. Koray not much to see yet. just a painted shell. bad interior and engine bay still lol. |
Author: | D3bb4 [ 21 May 2008, 09:22 ] |
Post subject: | Re: FRONTN |
Very nice work!!! |
Author: | eclipz [ 21 May 2008, 09:39 ] |
Post subject: | Re: FRONTN |
shit nice work mate, Zoran used to do alot of work round Geelong and even on some of my cars. I had always heard of this phantom cordia that was quick as lightning but never managed to see it in the flesh. Keep up the good work!!! |
Author: | FRONTN [ 21 May 2008, 20:42 ] |
Post subject: | Re: FRONTN |
Ahh yehh this was zoran's cordia. I've never actually met him but talked to him on the phone about this car. Twas pretty average when I got it but yes finally getting looks to match it's go!!. Few yrs back i got a 13 flat with a gtech, but they're never accurate, zoran did get a 13 flat at calder tho.. eclipz if you're round my area come check it out if you like.. Still along way to go as will be trying a reverse turbo setup with an evo 7 rs turbo 9.8T. I'll be making my own manifold soon.. and needing bigger brakes.. |
Author: | eclipz [ 21 May 2008, 22:24 ] |
Post subject: | Re: FRONTN |
ey mate, once i get my cordia on the road and my license back ill be sure to check it out. how hard was it to modify the front bar? |
Author: | FRONTN [ 22 May 2008, 00:22 ] |
Post subject: | Re: FRONTN |
front bar took a while it wasn't hard.. just playing with plastic putty before i knew how to fibreglass. I ended up selling the front bar to oggy, he's down your way in colac tho.. I still gotta check up on his car.. I'll be fibreglassing a new full body kit in soon.. Maybe a trust type front bar.. but already have vertex rear bar n sideskirts in the build.. here's some pics.. along with some goodies waiting to go on. Buddyclub P1's and evo 2 recaro's. |
Author: | newy vr4 [ 25 May 2008, 00:30 ] |
Post subject: | Re: FRONTN |
I'm so jealous!!! Man i can't wait to see it when it is finished! |
Author: | FRONTN [ 25 May 2008, 10:02 ] |
Post subject: | Re: FRONTN |
newy vr4 wrote: I'm so jealous!!! Man i can't wait to see it when it is finished! lol newy.. my car hasn't moved in 2.5yrs! so i'll be trying to get it to run shortly. bodykit has now been put on hold.. shopping for brembo's now.. |
Page 1 of 9 | All times are UTC + 10 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |