hey mate yeah im not to bad and my cordia its just sleeping for abit bout couple months it be on the road

and it might be the view you took the picture that doesn't look good the rims look good but yeah if you get a better picture i will look good

as for the seats EVO85 i think they from just jap and pritty sure they come in black couse soon i be getting these seats they cost around the $350 mark for a pair that is but dont get me right

_________________
SOLD AB Cordia, 4G63 SOHC, 3" exhaust, HKS SSQV BOV, FMIC, K&N in box air filter, fresh new paint job, 16" chromes And Neons...
http://www.cardomain.com/ride/2225352

Hey guys thanks for the comments much appreciated.

Phaser - Mate I cant dump it anymore for the moment, as soon as the new box goes so will the stock wheels then i'll have some fun with it and I can't do that if it's too low hehe.

Sleeping giant - Brad champ, I don't mind the non tint look i'll might be doing my interior far down the track but that tint could sure come in handy on hot days aye and give it that different look

Thanks for the comment about the wheels too I saw them in the magazine fell in love with them I haven't seen them on barely on any other cars, chances are other people are doing the same thing sooner or later more people will have them. I had to make sacrifcies to buy them lol.

Evo85- Hey mate, I didn't install the seats personally myself as a dads mate did it although I did help with the rail adjustment and modifcations needed for the seats to fit. from Just Jap; just for you guys interstate on top of the price of $350 you will have to pay shipping. I used the stock cordia rails but just adapted them to fit my seats. The seats do come in black champ it all depends on stock best to ask Justjap about stock enquiries and shipping costs. They are ADR approved and are built quite well. If I have the time I will actually post up a faq on how to install bucket seats in a cordia.

Any questions about installation or details of the seats and fitment etc etc please feel free to shoot me a PM. Or if you have msn we can chat about it there.


Here are some other pics guys, the rest of them are coming shortly.



[/url]

_________________
So close yet so far.........

MORE PICTURES FOLKS

http://img129.imageshack.us/img129/9582/jayscordiarear28ua.jpg

http://img164.imageshack.us/img164/9800/jaysseatsrear7ml.jpg

http://img104.imageshack.us/img104/4843/jayscordiaside0zx.jpg

oh yeahh im digging the rims now love it

keep up the good work mate

_________________
SOLD AB Cordia, 4G63 SOHC, 3" exhaust, HKS SSQV BOV, FMIC, K&N in box air filter, fresh new paint job, 16" chromes And Neons...
http://www.cardomain.com/ride/2225352

just noticed, thats illegal shit jay..PRIVATE PARKING>..

nahh.. aint illegal. i told him he could.

_________________
parts needed: malpassi rising rate reg and lotsa work/time
605X405X78 intercooler
D3B4ST8 is almost done

Love those wheels....

_________________
________________________________________
bugger

Appreciate the comments guys,

Just installed gauges this weekend thanks to all my mates I am so greatful for the dedication you have shown in assisting through the mods of this car. I'm just waiting for monster tacho to arrive then i'll hook that up and the rest of the senders for the guages. Also purchased metal billet door handles, new 6x9's and 6" speakers for the front. Hopefully when the new box, brakes, and cvs go in I can have a little more fun with it.

Will get more pics up shortly.

_________________
So close yet so far.........

can we do another photo shoot? pleeeeeease

_________________
parts needed: malpassi rising rate reg and lotsa work/time
605X405X78 intercooler
D3B4ST8 is almost done

For sure debba we can do photoshoot. I do hope your car will be in it too If it is alleluia it's about time

_________________
So close yet so far.........

looks Very nice!!!

Cant wait to see it run into the 13's

Hey Tom realistically mr car will probably run in the 14's it will be my first time out on the track when it eventaully ventures out there. if i can run 13's I will be stoked but I doubt it at the moment.

Now to hook up the rest of these gauges and this monster tacho anyone care to help me with the hooking up of my monter tacho in particular?

_________________
So close yet so far.........

i'd love to help you, but i dunno wtf i'm doing

_________________
parts needed: malpassi rising rate reg and lotsa work/time
605X405X78 intercooler
D3B4ST8 is almost done

VERY nice Jay.

Love those rims. When did you get them?
I can see the car is starting to come along very nicely. And i want those seats!! will be good to see it next cruise or at the drags if i get there.
Let me know how you go with your new gearbox too. Are you buying another one or getting yours rebuilt? cause im thinking about replacing mine or getting rebuild.

Hey Kev,

Cheers for the comments, rims were purchased quite a while ago on the 25th of Febuary to be exact then they had to be altered to be able to fit my car. I absolutely fell in love with them on first sight, and hopefully the rims don't become too popular.

As for the gearbox i'm just getting a second hand one for now iv'e got another gearbox thats ready to go in in case this second hand one goes then it will be up for a rebuild once more power goes into the car. Iv'e replaced the clutch previously and now I have a feeling the rpessure plate or the clutch is stuffed again so hopefully very soon I can have a better box, clutch, engine mounts etc put in. Also I need the brakes put in as the pancakes I have at the moment are really scaring me.


Go for it mate get those seats Once installing them the car doesn't even feel like a cordia anymore just gives a whole new driving experience I guess.

Hopefully I can get it fixed up ins current form to get it to the track asap, I want to see how it goes at the moment before any changes and further modifcations are made. And basically have some fun. Iv'e done some little mods here and there since the rims photos but they'll go up soon.

_________________
So close yet so far.........

haha see that tag in the background that says "homo"

classic

_________________

Hey guys added a few things to the cordia. Been a while since ive uploaded pics. Theres still so much to do.

Added a new exhaust system new Xforce hi flow cat and Hurricane cannon.

600x300x76 fmic and intercooler piping.
Also with the new fmic and piping the flutter on my car has changed quite a bit and hopefully I can upload the videos soon.

Pics and links are below:







Also included white faced dials, new oil temp, oil pressure, air fuel ratio, water temp, volts, boost gauges and monster tacho we had to quickly mount the monster tacho where we could find a place to put it as it was getting dark and Coulden't find the proper bracket and screws for the side of the soft and weak dash where it was intended to go. Monster tacho wil hopefully get re mounted shortly.

_________________
So close yet so far.........

looks NOICE. glad you got a bigger cooler

....waiting for flutter.....

_________________
parts needed: malpassi rising rate reg and lotsa work/time
605X405X78 intercooler
D3B4ST8 is almost done

Hey guys, seeing as my clutch, cvs and gearbox are about to go, and i'm about to replace it.

I thought I may as well post up some videos of my flutter after installing a different intercooler and piping. I experimented as much as possible to get as much flutter in all different situations for your entertainment lol. I found pumping the throttle to be most effective.

My clutch, cvs and gearbox are now crying basically after these videos lol


Cheers,

Jay.

http://media.putfile.com/jays-cordia-flutter1 *short flutter*

http://media.putfile.com/jays-cordia-flutter-2 *long flutter slight punishment of transmission etc*

_________________
So close yet so far.........

that is sexual flutter!!!
alhtough i think i hear a clutch being murdered.