hey guys. i have just bought some 18" x 7" wheels with 225 tyres. will these fit my cordia or will i have to get 215 tyres or something? will i have to roll the guards or modify anything? any help would be much appreciated.
thanks.
dean.

_________________
EVO powered Cordia.

if it's not lowered afaik it should be fine, just bolt one up and see if it fits would be the obvious answer.

_________________
Gallo 24 all the way

what profile tyres are they 225x??x18?

make sure that the inside of the tyre does not rub on the suspension strut.

let me know how it goes as i am looking into fitting similar width tyres to my car

_________________
B&N Automotive Engineering

they are 225x40x18 tyres.

_________________
EVO powered Cordia.

they will rub on the front on full lock,rears may fit ok.
the overall diameter is to big and they will not be roadworthy,
the standard aa/ab 185/60/13 diameter is 596mm,the wheels you are
getting 225/40/18 have a diameter of 637mm, approx 30 mm bigger in diameter.
qld transport only allows 15 mm bigger diameter.not sure where you
are from but i think all states are similar.
david

umm.. 18/40/255... hrmm i think youll need 35s 40s is prob too much rubber on 18s for a cordia..

_________________
()...()
(o o)
/ ( ..)
/ ""
"All throttle, no bottle"
AC GSR - Worked 4G62BT (Original 510DIA)-SOLD-
AC GSL - VR4 Turbo (Slowdia NO2) -SOLD-
Honda Civic - H22aT transplant -SOLD
180sx - RB'd -SOLD-
R32 - RB Powered -SOLD-
Honda Civic vtiR, vtec yo!

They're going to be mad... I'm putting 215/40/R17's on and I thought they were going to be big :O

In regards to legality, look in the FAQ's, there's a post on it.

Astaroth.

_________________
[size=75]Ich will die Ruhe stören

Bones heal, chicks dig scars, glory lasts forever.