Can anyone recomend me to somewhere in sydney ,Revesby area to get some work done on the 88 AC? Exhaust, intercooler, boostcontroller etc?
Preferably someone that knows Cordias.

made up or installed or both? I have spares of all those parts...

_________________
parts needed: malpassi rising rate reg and lotsa work/time
605X405X78 intercooler
D3B4ST8 is almost done

Made up and installed.
cheers

Ok ive found someont to do the cooler and exhaust. now just somewhere i can get a a bit of boost and boost controller done?

if your just gonna go manual you can do that yourself, its just a bleed tap you install between the turbo housing and the waste gate acutuator, very easy to do, i recomend a turbotech controller and leave it in the engine bay so your not tempted to fiddle with it and blow your engine

_________________
Quench my thirst with gassoline!

yeah i wanted to go electronic. i like doing things the best i can afford to. any idea where i can get one and get it fitted around my area (revesby) and what brand to get. can you get a time/boost controller in one unit?

thats a fairly large commitment for a std 4g62, you might find for some cash going multi point or even vr4 would be better than electronic upping of the boost, just saying so you have some more options

for a work shop to source fit and tune a electronic boost controller your almost looking at the cost of a aftermarket computer tune and you might have more fun with more response than just more boost, if you want rawr boost poawr then manual controller might be better for starters till you know what your dealing with.

as i said just another option for you.

_________________
"hahhahahhaa its good its got straw for a pipe frontn.... the bigger that hole gets the more money falls out of ur wallet... "



Epic i must say.

sweet i put a manual boost controller on it on the weekend. now im just trying to find a tco5 to high flow and swap over. any idea what the high flow will cost and any ideas where to get this done in sydney......any recomendations?

precision turbos. is wetherill park or around that sorta area.

_________________
parts needed: malpassi rising rate reg and lotsa work/time
605X405X78 intercooler
D3B4ST8 is almost done

last quote i got from a shop was 600 for hi flow tc06 turns it into a new turbo basicly

_________________
"hahhahahhaa its good its got straw for a pipe frontn.... the bigger that hole gets the more money falls out of ur wallet... "



Epic i must say.