Cordia Forum
https://www.cordiapower.com/forum/

clutch?
https://www.cordiapower.com/forum/viewtopic.php?f=3&t=17930		 Page 1 of 1
Author:  fernandothecarguy [ 23 Mar 2016, 08:55 ]
Post subject:  clutch?
Hi I was wondering if the stock cordia takes the same clutch as the turbo model?
I have asked people that sell on eBay but there's confusion they think turbo model 4g63
So does the clutch for 4G32 fit the 4g62
Any help thanks
Author:  Bitza [ 23 Mar 2016, 09:34 ]
Post subject:  Re: clutch?
No, the GSL is 200mm in diameter where the GSR is 215mm, the kit you need is PBR TURBO clutch kit (R318N)
Author:  fernandothecarguy [ 23 Mar 2016, 13:24 ]
Post subject:  Re: clutch?
thank you
Author:  fernandothecarguy [ 02 Apr 2016, 18:22 ]
Post subject:  Re: clutch?
Hi everyone.
I bought clutch the ad on eBay clear states for a cordia turbo.
I noticed the plate is different and the bearing is smaller in size will not fit the shaft of gear box
the clutch is exact the same ,the clutch plate has more spines in the spring as
you can see in picture Im thinking maybe is meant for stock cordia.
If someone can tell me if its OK all I need is proper size bearing.
I will contact them on eBay if its not the right clutch

Attachments:
3.jpg
3.jpg [ 138.79 KiB | Viewed 14896 times ]
2.jpg
2.jpg [ 160.23 KiB | Viewed 14896 times ]
1.jpg
1.jpg [ 156.53 KiB | Viewed 14896 times ]
Author:  fernandothecarguy [ 02 Apr 2016, 18:25 ]
Post subject:  Re: clutch?
does this mean old one is heavy duty
compare to new one

Attachments:
4.jpg
4.jpg [ 106.44 KiB | Viewed 14896 times ]
Author:  fernandothecarguy [ 02 Apr 2016, 18:42 ]
Post subject:  Re: clutch?
PBR Clutch Kit FOR Hyundai Lantra, Mitsubishi Cordia, Lancer, Galant, Magna, Nimbus

3 piece kit includes cover assembly, drive plate and release bearing. Does not suit VR4 or Evolution models.

Part Number

Brand

Condition

Dimensions (Clutch Plate)

R318N

PBR (Clutch Industries)

New old stock

215mm x 20 teeth x 22.41mm internal diameter

Check plate dimensions before ordering.

Make

Model

Year

Engine

Hyundai

Lantra

10/1993-10/1995

G4CR 1.6L 4 Cylinder DOHC 16v

Mitsubishi

Cordia AA, AB, AC (Turbo models only)

04/1983-07/1989

4G62 1.8L 4 Cylinder SOHC 8v Turbo



Galant HG, HH including GSR

05/1989-03/1993

4G63 2.0L 4 Cylinder DOHC 16v including Turbo



Galant HJ

04/1993-05/1996

4G63A 2.0L 4 Cylinder SOHC 16v



Lancer CC including GSR

09/1992-03/1995

4G93 1.8L 4 Cylinder DOHC 16v, 4G93T 1.8L 4 Cylinder DOHC 16v Turbo



Magna TM

04/1985-05/1987

4G54 2.6L 4 Cylinder SOHC 8v



Nimbus UC

09/1987-01/1992

4G63 2.0L 4 Cylinder SOHC 8v

Proton

M21

10/1997-09/1998

4G93 1.8L 4 Cylinder DOHC 16v



Satria GTi

08/1999-12/2005

4G93 1.8L 4 Cylinder DOHC 16v

Visit our eBay store, email us at sales@autosurplus.com.au or call us on 03 9873 3566 to speak with one of our parts experts (combined 100 years experience).

For over 40 years Auto Surplus has been supplying engine, brake & clutch, suspension and electrical parts for a large variety of veteran, vintage, classic and current day vehicles.

We have the largest inventory of loose piston rings in Australia. We also recondition water pumps, suspension parts, fuel pumps, carburettors and electrical components.
Author:  Bitza [ 02 Apr 2016, 18:50 ]
Post subject:  Re: clutch?
Was it a R318N kit?

Had no problems with mine on the AC.

Image
Author:  fernandothecarguy [ 02 Apr 2016, 19:00 ]
Post subject:  Re: clutch?
yes R318N
Author:  fernandothecarguy [ 02 Apr 2016, 19:03 ]
Post subject:  Re: clutch?
the only problem is bearing small .
i think they sent me wrong bearing.
i don't no if i should complain get new bearing or just use my old one
im just thinking postage cost
Author:  fernandothecarguy [ 02 Apr 2016, 19:04 ]
Post subject:  Re: clutch?
all tho its there fault im just thinking might cost someones job
Author:  fernandothecarguy [ 02 Apr 2016, 19:06 ]
Post subject:  Re: clutch?
Bitza wrote:
Was it a R318N kit?

Had no problems with mine on the AC.

Image


just like mine lol
Author:  Bitza [ 02 Apr 2016, 19:06 ]
Post subject:  Re: clutch?
I just edited my post, your clutch looks different to mine, contact the seller and see what they say.
Author:  fernandothecarguy [ 02 Apr 2016, 19:18 ]
Post subject:  Re: clutch?
ok will do
will keep you posted
Author:  fernandothecarguy [ 02 Apr 2016, 19:55 ]
Post subject:  Re: clutch?
is your clutch same brand as mine
Author:  fernandothecarguy [ 02 Apr 2016, 19:56 ]
Post subject:  Re: clutch?
ci
Page 1 of 1 All times are UTC + 10 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/