Cordia Forum https://www.cordiapower.com/forum/ |
|
TP magna digital dash https://www.cordiapower.com/forum/viewtopic.php?f=4&t=16089 |
Page 5 of 6 |
Author: | Bitza [ 09 Oct 2010, 22:00 ] |
Post subject: | Re: TP magna digital dash |
Should look even better with this installed: |
Author: | cordiaaaturbo [ 10 Oct 2010, 02:06 ] |
Post subject: | Re: TP magna digital dash |
what the devil is it? |
Author: | Bitza [ 10 Oct 2010, 10:23 ] |
Post subject: | Re: TP magna digital dash |
It's my Knight rider steering wheel.............got bored one day and made it out of fibreglass and an original wheel. |
Author: | cordiaaaturbo [ 10 Oct 2010, 11:18 ] |
Post subject: | Re: TP magna digital dash |
OH ofc... god no dont do it... unless you paint your car black... come to think of it.. i know a black cordia... ::D lol |
Author: | S1VART [ 11 Oct 2010, 20:42 ] |
Post subject: | Re: TP magna digital dash |
that wheel is wicked , I wish I could make parts like that |
Author: | Bitza [ 06 Dec 2010, 18:02 ] |
Post subject: | Re: TP magna digital dash |
Update: Finally got hold of Sam today..........should see the fascia panel sometime next week.........yeah......about time, it's only been 3 months! |
Author: | Bitza [ 22 May 2011, 15:04 ] |
Post subject: | Re: TP magna digital dash |
Update: Received the original dash fascia back........but as you can see from the photo the markings are printed on the plastic......so rather than polish them off I made a new one out off UVex (Bottom) Hopefully get an email this week for the fascia panel as the markings are printed on the white vinyl. |
Author: | Tomica93 [ 06 Apr 2012, 06:41 ] |
Post subject: | Re: TP magna digital dash |
Hy there i need some help about this i have magna digital dash, i figure out everything but water temperature and fuel level 4 wires left, i found that diagram and connect it as it was shown on the picture but with no success still iam not getting right iam not sure either i have good fuel sensor here is an video how it works so far http://www.youtube.com/watch?v=8VVBjSz283U and also i have install it today in my car and at night i dont see numbers(rpm) at all, is there maybe some wire for lights? because on mine two more bulbs doesnt work one on each side so maybe that could help thanks for any info about wireing those two more stuff |
Author: | Tomica93 [ 11 Apr 2012, 03:22 ] |
Post subject: | Re: TP magna digital dash |
here is the best one if anyone will need this |
Author: | white88 [ 26 Jun 2015, 18:47 ] |
Post subject: | Re: TP magna digital dash |
Nice work. Reminds me of the digital dash that was in the 1st gen Magna Elite my mum had. Loved watching that thing when i was a kid. |
Author: | jdfirefly [ 30 Nov 2015, 23:09 ] |
Post subject: | Re: TP magna digital dash |
Do you still have your spare digital cluster |
Author: | Bitza [ 01 Dec 2015, 19:44 ] |
Post subject: | Re: TP magna digital dash |
I have 2 spare magna dashes.........both early and late models..........both work well. |
Author: | jdfirefly [ 02 Dec 2015, 22:45 ] |
Post subject: | Re: TP magna digital dash |
Nah still want the cordia one i got a magna one cheers any way andrew |
Author: | gege687 [ 11 Jan 2016, 04:42 ] |
Post subject: | Re: TP magna digital dash |
Tomica93 wrote: Hy there i need some help about this i have magna digital dash, i figure out everything but water temperature and fuel level 4 wires left, i found that diagram and connect it as it was shown on the picture but with no success still iam not getting right iam not sure either i have good fuel sensor here is an video how it works so far http://www.youtube.com/watch?v=8VVBjSz283Uparis shuttle and also i have install it today in my car and at night i dont see numbers(rpm) at all, is there maybe some wire for lights? because on mine two more bulbs doesnt work one on each side so maybe that could help thanks for any info about wireing those two more stuff I do not think it has to do with fuel sensor |
Author: | 0-PSI [ 25 Jan 2016, 01:02 ] |
Post subject: | Re: TP magna digital dash |
Is there anyone within AUS still looking for parts from an Elite? I have come across somebody not far from home whom is wrecking not just 1 but 2 TM Magna Elite's. I'll be contacting the seller tomorrow to confirm parts availability. So for my own reference of a potential purchase, from what I have gathered - other than the cluster itself I'm going to need the temp gauge sender as well. Anything else worth taking? Cluster plugs etc.? |
Author: | Bitza [ 25 Jan 2016, 13:12 ] |
Post subject: | Re: TP magna digital dash |
Make sure you get the fuel sender unit (in the fuel tank) and the electric speedo (located on the gearbox where the cable is located), take the cluster plugs aswell, you will need them to graft onto the cordia loom as it's a different connection. |
Author: | 0-PSI [ 25 Jan 2016, 15:39 ] |
Post subject: | Re: TP magna digital dash |
Thanks for confirming Andrew. Some very useful information here. Did you or anyone else that you know of ever successfully custom mount the Magna cluster to the Cordia surround? I hope to experiment with a spare that I have if I get my hands on one. |
Author: | Bitza [ 25 Jan 2016, 17:11 ] |
Post subject: | Re: TP magna digital dash |
The magna dash is a little tall, the warning lights down the bottom will foul on the rear demister and washer switches, you will have to relocate them, a custom shroud will need to be made, doesn't look that hard to fit, just fiddly. |
Author: | Bitza [ 27 Mar 2018, 17:17 ] |
Post subject: | Re: TP magna digital dash |
Great to bring up an old thread........after all these years I have finally got the digital dash 100% operational......gave up on the fuel sender unit as I couldn't get it to work........pulled it out today for another go...........simple really..........the stock fuel sender unit can be used, just need to find the 5 volt source from the dash and run to the yellow (power) wire of the cordia and ensure the ground is returned to the dash........vola.........fuel gauge works 100%!!!!!!! Bloody stocked!!!.........have also found a guy to help replicate the white fascia in vinyl............get ready for install. https://scontent-syd2-1.xx.fbcdn.net/v/ ... e=5B41C616 |
Page 5 of 6 | All times are UTC + 10 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |