12mm bolts x4 under it, can be a pain to get out if your car is low or you have a massive zorst in the way. I think the ones that hold it to the gearbox are 14mm.
if you just have the rubber thing you will need some internal cir clip pliers to remove the gear stick so you can separate it and get it out of the mounting plate.
removing the gear stick through the floor is pretty straight forward, getting it into the new spider is the annoying bit
_________________ 2009 Black Xr8 Ute. Boss 290 2001 TM Racing 250EN 2T, HGS, Ohlins, brembos etc 1985 AB GSR. VR-4, LSD, Wolf, 188KW at the wheels FTW! 1984 AB GSR all in bits. 1982 JA Starion 1973 Yamaha RD 250 project cafe racer
|