Cordia Forum
https://www.cordiapower.com/forum/

intake manifold vaccum lies
https://www.cordiapower.com/forum/viewtopic.php?f=4&t=17936
Page 1 of 1

Author:  blucordia85+ [ 03 Apr 2016, 12:11 ]
Post subject:  intake manifold vaccum lies

Hi all just wondering what to do with the vaccum that was connected to a blowoff valve that I removed of my vr4 conversion.. If I block it off it stops the engine, the other vaccum near it goes to the microtech so can I just tee it in?

Author:  Bitza [ 03 Apr 2016, 12:17 ]
Post subject:  Re: intake manifold vaccum lies

Confused...........are you adding a blow off valve or removing one?

Author:  blucordia85+ [ 03 Apr 2016, 12:24 ]
Post subject:  Re: intake manifold vaccum lies

I've removed the blow off valve and it had vaccum line connected to the intake manifold, don't know what to do with the vaccum line still attached to the manifold?

Author:  Bitza [ 03 Apr 2016, 12:28 ]
Post subject:  Re: intake manifold vaccum lies

What part of the manifold are we talking here?

The engine should not stop if you plug it.

Author:  blucordia85+ [ 03 Apr 2016, 12:44 ]
Post subject:  Re: intake manifold vaccum lies

It's on the intake just just behind where the 4th injector is, there are a couple of other vacuums that are the same height just apart.. One goes to the the ecu and the other goes to the fuel pressure regulator setup.. Thanks for your patience

Author:  Bitza [ 03 Apr 2016, 12:57 ]
Post subject:  Re: intake manifold vaccum lies

What type of manifold do you have?

The N/A version or the Cyclone dual runner version?

Author:  blucordia85+ [ 03 Apr 2016, 13:03 ]
Post subject:  Re: intake manifold vaccum lies

Is says cyclone turbo intercooler..

Author:  Bitza [ 03 Apr 2016, 13:26 ]
Post subject:  Re: intake manifold vaccum lies

Hope this helps:

Image

Author:  blucordia85+ [ 03 Apr 2016, 13:29 ]
Post subject:  Re: intake manifold vaccum lies

That's it.. So where abouts on the fifth gear actuator? Thanks again for the patience..

Author:  Bitza [ 03 Apr 2016, 13:35 ]
Post subject:  Re: intake manifold vaccum lies

Image

You will see the one way valve line in the pic, this goes to the larger pipe as per the first pic.

Author:  blucordia85+ [ 03 Apr 2016, 15:33 ]
Post subject:  Re: intake manifold vaccum lies

Thanks for your help much appreciated...All sorted now I just need a tune and hopefully I get 250hp as the previous owner claims...

Page 1 of 1 All times are UTC + 10 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/