Cordia Forum https://www.cordiapower.com/forum/ |
|
Clutch for Vr4 engine https://www.cordiapower.com/forum/viewtopic.php?f=4&t=17962 |
Page 1 of 1 |
Author: | GORAN [ 10 May 2016, 17:11 ] |
Post subject: | Clutch for Vr4 engine |
Hi all, The plan is before the new engine goes in to get a new clutch. I need a decent clutch but it has be ok for every day driving. What would you recommend? Also since the new rebuild gearbox will go on, I am thinking of replacing the rear main seal, might as well. What is the part number for one of them? Cheers |
Author: | 4cylturb [ 12 May 2016, 23:41 ] |
Post subject: | Re: Clutch for Vr4 engine |
Exedy MBK6276HD. Installed one of these myself about 8 months ago on my daily. Car is making 180kw. Never had a problem. Great clutch! |
Author: | 4cylturb [ 12 May 2016, 23:44 ] |
Post subject: | Re: Clutch for Vr4 engine |
Forgot to mention i use standard cordia box and flywheel. |
Author: | GORAN [ 13 May 2016, 11:50 ] |
Post subject: | Re: Clutch for Vr4 engine |
Thanks for that. What is the clutch rated to? My engine makes 264 kw at the moment. |
Author: | 4cylturb [ 24 May 2016, 02:10 ] |
Post subject: | Re: Clutch for Vr4 engine |
I'm not sure what the exedy is rated to handle. Did a quick search and couldn't find anything. I've read about people using them with your power levels but in the end it is still a relatively cheap clutch. About a dollar per kw for you (cost me $276). |
Author: | S1VART [ 24 May 2016, 10:59 ] |
Post subject: | Re: Clutch for Vr4 engine |
this is the guy to call http://raceclutch.com.au/ |
Page 1 of 1 | All times are UTC + 10 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |