Cordia Forum
https://www.cordiapower.com/forum/

replacement E101 - Ignition Control Unit
https://www.cordiapower.com/forum/viewtopic.php?f=4&t=21254
Page 1 of 1

Author:  Kennyg [ 26 Aug 2018, 18:33 ]
Post subject:  replacement E101 - Ignition Control Unit

Hey guys,

Anyone know of any spare E101's floating around? I've got no spark or pulse from the knock box therefore as it hasn't been used in 15+ years I reckon its a good place to start to find a replacement.

As a way of checking that my E101 isn't working, I would also be interested to swap it out with someones working unit just to confirm. I'm in Sydney.

Author:  GORAN [ 27 Aug 2018, 11:52 ]
Post subject:  Re: replacement E101 - Ignition Control Unit

I am sure you can use an aftermarket bosh one ( I had one on my car years ago) do a search, there is a good write up somewhere on how to rewire it from the original E101.

Author:  Kennyg [ 27 Aug 2018, 12:02 ]
Post subject:  Re: replacement E101 - Ignition Control Unit

I read about the Bosch units but everywhere it says that you would then be without knock control. How does that affect normal running say with 89 fuel? Is it a problem or not to have no knock control?

Author:  GORAN [ 27 Aug 2018, 12:10 ]
Post subject:  Re: replacement E101 - Ignition Control Unit

I had the bosh unit on mine, I was running a very high boost and never had a problem.

Then again my engine was made to run big power back then ,if you are going to run stock engine it might be an issue. I wish I could tell you more.

https://www.haltech.com/knock-control/

Author:  Bitza [ 27 Aug 2018, 17:48 ]
Post subject:  Re: replacement E101 - Ignition Control Unit

I have 8 of the things, fully functional...........do you need the AB or AC one?

There timing retard is different, only problem is I'm not in Sydney.

Author:  Kennyg [ 28 Aug 2018, 11:48 ]
Post subject:  Re: replacement E101 - Ignition Control Unit

@Bitza its for an AB

Send me an email on kenlowe2011@gmail.com and I'd be fine to fix you up for one unit including postage to Sydney.

Cheers

Page 1 of 1 All times are UTC + 10 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/