My turbo f*** up and now i'm going to change it. Are there any special steps or thing I need to do so I don't mess it up. any help would be good thanks

_________________
Michael 88 cordia turbo 98 eclipse turbo Just bought a 88 starion with a 302 V8 in it.

Just be careful unbolting it from the manifold and exhaust, use alot of oil/WB-40 to loosen them so that you don't damage the bolts plus it's damn hard to undo, use a pipe to extend the socket spanner handle if you want to make it easier.

Don't lose any of the bits either, nothing to special, just common sense !

_________________
Spares galore, PM me on what your after.....

my tip would be make sure your sure the turbo is fudged before you take it off...smokey or something or not boosting etc..??....

apart from that...piece of piss...to a degree...dont loose the oil pipe copper washers etc...though i'd reccomend replaceing them anyway...

_________________
Is there anything better in life than boost...??

yeah use shit loads of WD40 etc. even soak them overnight. makes it ALOT easier and u won't snap studs or bolts which turns the job into a nightmare

_________________
WRX 'The cordia of the 90's'