There is member who is selling all the gear you will need for 4WD And for only $700!!! Shoot him a pm his user is Gooch. Here is the thread viewtopic.php?f=6&t=15519

He is located in Brisbane which seems to be a little problem for us Melbourne guys. But I have purchased from him in the past and he was reliable.

That being said, apparently the floor pan needs to be changed. So, my advice would be that unless you are willing to hack into your $5500 car for a project which you may never accomplish it may not be worth it.

Many owners such as Andrew (Bitza), Brad (Evo85), Mike (ENGNRD), Tim (Frontn), Gooch and myself have considered and/or looked into the conversion, but have steered away as it all seems to be far more effort than its worth. In all honesty do your self a favour and buy an evo/gsr.

Good luck mate.

_________________
|VR4 4G63 RS|MicroTech lt8s|Ported TD06sl2-25g|Ported & Polished Head|HKS Front Mount|3" Exhaust|
|Coilovers|Swaybars|VR-4 2pot Calipers|TP rears|Evo3 Master/Booster|Evo 3 front bar|Side Skirts|Rear Lip|

Nice to see I am still worth a mention on this forum. Thanks Koray!

Please don't waste your time and money with the 4wd conversion. Buy an Evo!

_________________
Street/track spec Evo VI GSR in the making...

No problems mate. So, I take it may be back then?

Btw ill shoot you a Pm 2night. need to ask you somthing

_________________
|VR4 4G63 RS|MicroTech lt8s|Ported TD06sl2-25g|Ported & Polished Head|HKS Front Mount|3" Exhaust|
|Coilovers|Swaybars|VR-4 2pot Calipers|TP rears|Evo3 Master/Booster|Evo 3 front bar|Side Skirts|Rear Lip|

i do have to agree with koray... i love cordias to death but it is at the point where your going to poor thousands of dollars and lotsa time into the car to not add anything to the value, early evos are getting cheaper and are faster

i'm still keen to make a tiny 4wd fun car in the future but if/when i do it will be a mirage or 2 door lancer i reckon, just something a bit more modern

_________________
Quench my thirst with gassoline!

4wd fun car... gtir pulsar...

_________________
parts needed: malpassi rising rate reg and lotsa work/time
605X405X78 intercooler
D3B4ST8 is almost done

_________________
parts needed: malpassi rising rate reg and lotsa work/time
605X405X78 intercooler
D3B4ST8 is almost done

as far as i'm aware it has been sold and then blown up and its now on carsales for the next unsuspecting victim

_________________
Quench my thirst with gassoline!

How many owners has this car had?

A few by the sounds of it.

tom/rx2 - luke/starorion - someone he knows and now for sale again, other than that nfi

_________________
Quench my thirst with gassoline!

I was the actual 3rd owner of the car.... To blow that motor up, something else would have to of been neglected...or ridiculous boost

http://www.carsales.com.au/all-cars/pri ... ia&trecs=5

prolly not something we should be discussing in public.. pm inbound tom

_________________
Quench my thirst with gassoline!

lol, 240kw atw @ 10psi on a B16g and stock injectors.....

_________________
For all your Cordia's needs in Adelaide.
http://www.drivenmotorsport.com.au

Hummmmmmmmmmm. No..........I had to run a T3/4 plus RX-7 injectors just to make 220 @ 18psi!

Maybe that's why it blew up.............running REALLY lean!

240fwkw's with 10psi with a TD05 16g and stock 450cc injectors!! And 290kw's!! Aahahaha!! The guy is an idiot, and I am struggling to restrain myself from abusing him (in which he rightly deserves).

_________________
Street/track spec Evo VI GSR in the making...

maybe 240hp?
but yes definately those figures are hella high!

_________________
FRONTN-Cordia GSR |Tim|
|VR4 4G63BT|MicroTech LT8S|E7RS 9.8T TD05HR|560cc|Buddyclub P1|White on white||evo 2 brakes|
167fwkw @ 8200rpm 400nm (16psi)

PS: Lol @ spell check, it doesn't even know what a "Cordia" is.

aww what a waste.. blowing that mint motor! douche. Really like this car hopefully someone from here picks it up but not at that price

Ask luke what he got when he had it on the dyno last, He will tell you as it is. (the car is running evo yellowtops last time I heard)
I have no doubt the build would be capable of those outputs(with the right boost/ fuel delivery.) But the bloke selling it is talking it up ALOT. the exhaust manifold has discolored and turned blue....looks to be very lean

this is so said to see such a nice car that we have all been apart of the build over thea year looking like this. hope it end's back in the hands of a Cordia Power or a CORIDA FREAKS owner,

but time will tell

_________________
For Sale
AA White GSR, hiflow TC06, reco Motor, 3inch exhause, k&n air cleaner
viewtopic.php?f=5&t=16477
All my Cordia Parts For Sale make an Offer
viewtopic.php?f=6&t=15917

would be a miracle that thing still runs after being so hot.

_________________
"hahhahahhaa its good its got straw for a pipe frontn.... the bigger that hole gets the more money falls out of ur wallet... "



Epic i must say.

the car definitely needed a tune, having test drove it a little while ago and if i remember correctly..was only running 14psi or so but it was running quite rich. not too sure if luke ended up getting it tuned before he sold it or not but as everyone else has stated, would be a shame if this car or the engine for that matter end up in pieces.