Cordia Forum
https://www.cordiapower.com/forum/

AB GSR aka MAD.48U.. whole or seperate..
https://www.cordiapower.com/forum/viewtopic.php?f=5&t=15923		 Page 1 of 1
Author:  85_cordia_GSR [ 23 Jun 2010, 18:42 ]
Post subject:  AB GSR aka MAD.48U.. whole or seperate..
Hey guys, my Cordia definantly up for grabs now as I currently have 3 cars so some have to go haha..
The car is defected for too loud, too low, no engineers for mods/conversion so might be easier sellin as parts..
the body has ssen better days, and NO stereo gear will come with the car. Needs clutch release bearing (included in sale)
some pics can be seen in the pics section or here http://www.cardomain.com/ride/350356
the boot setup etc will be there jus no audio gear.. got new tyres few weeks before it went off the road (2yrs ago)
after $5500ono (the engine setup has cost me twice that!!)

ENGINE:
4G63 motor (VR4)
arias 20thou over forged pistons
Eagle H-beam rods
BC 272 cams
BC valve springs & titanium retainers
Fidanza cam gears
ACL race series bearings
balance shafts removed
balanced
TD05 20G turbo with TD06 comp cover
cometic headgasket
650cc injectors
billet fuel rail
malpassi rising rate reg.
bosch fuel pump
microtech lt8s ecu
550*276 fmic with 2.5" stainless piping
3" mandrel exhaust from turbo back
Alloy radiator
oil catch can

INTERIOR:
resprayed dash (black with silver higlights), sports steering wheel & pedals & gearknob, recaro leather door trims and rear seats, autometer boost gauge + AFR gauge, short shifter, car alarm, new black carpet, HKS electronic boost controller

EXTERIOR:
MAD.48U plates, resprayed plastic bits, red bonnet LED's, solex locks

WHEELS AND SUSPENSION:
2" lowered king springs, Bilstein shocks, 17" mags, Vr4 front brakes, magna rear disc brakes, bendix advance pads

DRIVETRAIN:
rebuilt gearbox
Xtreme heavy duty cushioned button clutch

plus more im sure... lol

IF theres enough interest to strip it I'll come up with prices for the bits..
I'm located in Nowra NSW
Cheers!
Author:  85_cordia_GSR [ 28 Jun 2010, 22:21 ]
Post subject:  Re: AB GSR aka MAD.48U.. whole or seperate..
offers for parts or car?
Author:  JiMi [ 29 Jun 2010, 09:43 ]
Post subject:  Re: AB GSR aka MAD.48U.. whole or seperate..
how far you gonna go with the stripping? i presume the motor is gonna stay in one piece? if not i'd be keen on the head and cams/valves

other than that, turb and zorst mebbe but dont start striping just for me at this stage
Author:  PSI-GSR [ 29 Jun 2010, 21:15 ]
Post subject:  Re: AB GSR aka MAD.48U.. whole or seperate..
Dibs on the front spoiler!!! Pm me with how much you want for it if you part out mate.
Cheers, James.
Author:  TRQ-STR [ 29 Jun 2010, 21:20 ]
Post subject:  Re: AB GSR aka MAD.48U.. whole or seperate..
keen on injectors
Author:  85_cordia_GSR [ 29 Jun 2010, 23:30 ]
Post subject:  Re: AB GSR aka MAD.48U.. whole or seperate..
i really wanted to keep the motor fairly complete, hav a couple of guys on another forum inetersted in motor atm so will see how that goes first before stripping the motor down :)
have a local guy that wants the spoiler if I part it out (he's actually coming to look at complete car tomorrow though so also gonna see how that goes :))
Author:  JiMi [ 30 Jun 2010, 08:43 ]
Post subject:  Re: AB GSR aka MAD.48U.. whole or seperate..
all good, what you want and what i would pay are prolly different anyway :)
Page 1 of 1 All times are UTC + 10 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/