Cordia Forum
https://www.cordiapower.com/forum/

Custom TC06 exhaust Flanges. [Batch production] *$100 each*
https://www.cordiapower.com/forum/viewtopic.php?f=6&t=17833
Page 1 of 1

Author:  TheChosen1 [ 15 Jun 2015, 19:53 ]
Post subject:  Custom TC06 exhaust Flanges. [Batch production] *$100 each*

I have X20 custom made TC06 turbo exhaust flanges. Made recently, these are the only custom production batch in existence for this car on planet earth at present.

Material: Steel
Thickness: 12mm
Internal diameter: 62mm
How:Laser cut
To suite: 2.5 inch mandrel bent exhaust outlet.

Thickness of standard TC06 turbo flange: 10-11mm
Standard TC06 dump pipe Internal diameter:50-51mm
Improvement difference: Over 10mm.


Don't waste your time cutting/chopping the standard TC06 dump pipe. The flange is distorted and very restrictive to begin with. By the time you cut and re-weld the cast iron flange, the flange will be distorted more. These custom flanges are completely unrestrictive.

Image
Image
Image
Image


This is how your custom dump pipe would look like if you use my flange. (dump pipe tack welded)

Image
Image
Image
Image
Image
Image
Image


This is the ultimate start to your custom performance exhaust system. Nil restriction. Noticeable power and performance improvement. As you can see in the 6th and last pic, exhaust gases wont be doing a hard 90 degree turn like the standard dump pipe design.

Lastly, with precise placement, you may fit a 3inch pipe, as in a 3 inch dump pipe arrangement. However, 3 inch dump pipe is too big anyway.


Limited supply. Get them before they are gone forever.

Contact Details: Contact via this forum
Location: Sydney
Delivery & Conditions of Delivery: Postage only. NO PICKUP.



Price: $100, including postage.
POSTAGE ONLY.
NO PICKUP

Author:  Bitza [ 15 Jun 2015, 20:24 ]
Post subject:  Re: Custom TC06 exhaust Flanges. [Batch production]

Is this correct.........$120 for a flange or the pipe?

Does that price include the wastegate dump plate (as seen in your pics) as well to run a 1 inch pipe?

Author:  TheChosen1 [ 15 Jun 2015, 22:30 ]
Post subject:  Re: Custom TC06 exhaust Flanges. [Batch production]

Its $120 for the flange only, including full postage and handling. I provided pics to demonstrate how a custom made dump pipe looks like when starting with a brand new custom flange.


I have made a separate ad regarding the wastegate plate for screamer applications, or internal venting.

Author:  TheChosen1 [ 03 Jul 2015, 16:44 ]
Post subject:  Re: Custom TC06 exhaust Flanges. [Batch production]

Calling all cordia owners that have AB model cordia's with TC06 turbo's, you will gain instant power and performance if you have a custom dump pipe. Turbo spool response is noticeably quicker. Don't rely on the standard dump pipe. Its so restrictive. Im giving you the opportunity to make this happen with this custom flange to start off with. Don't bother with the standard turbo outlet.

Author:  TheChosen1 [ 14 Aug 2015, 11:14 ]
Post subject:  Re: Custom TC06 exhaust Flanges. [Batch production] *$105 e

Lowest i will go is $100 including postage.

Author:  Mong [ 02 Oct 2017, 17:34 ]
Post subject:  Re: Custom TC06 exhaust Flanges. [Batch production] *$100 e

Are there any of these left?

Author:  TheChosen1 [ 02 Oct 2017, 20:01 ]
Post subject:  Re: Custom TC06 exhaust Flanges. [Batch production] *$100 e

Plenty left indeed.

$100 and posted to you. If you do buy one, i encourage you to post pics on this forum to show others etc.

Page 1 of 1 All times are UTC + 10 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/