Cordia Forum https://www.cordiapower.com/forum/ |
|
WTB TURBO https://www.cordiapower.com/forum/viewtopic.php?f=6&t=21136 |
Page 1 of 1 |
Author: | fernandothecarguy [ 19 Mar 2017, 17:37 ] |
Post subject: | WTB TURBO |
TC06 in desperate need. preferably hi flow no shaft play. it has to be working 100% name your price including postage to sydney 2767 PM me asap thank you question any one know if turbo kits still exists for this old turbo? if yes where can i get one? i search google and nothing |
Author: | Bitza [ 19 Mar 2017, 19:57 ] |
Post subject: | Re: WTB TURBO |
MTQ engine turbo systems sell them. |
Author: | fernandothecarguy [ 21 Mar 2017, 20:14 ] |
Post subject: | Re: WTB TURBO |
Turbo Cartridge MHI TC06-11 49169-01200 how hard is to change over? looks like all i see is oil cool turbos |
Author: | Bitza [ 21 Mar 2017, 21:09 ] |
Post subject: | Re: WTB TURBO |
You will need to contact them for a rebuild kit...........my last one for the TC05 cost nearly $400! |
Author: | fernandothecarguy [ 22 Mar 2017, 19:41 ] |
Post subject: | Re: WTB TURBO |
don't have time to ring them by the time i get home try to ring all i get answering machine. hope there open weekends. might go see them not far from me like 20min MTQ Sydney 1018-1022 Canley Vale Road, Wetherill Park NSW 2164 |
Author: | fernandothecarguy [ 28 Mar 2017, 21:11 ] |
Post subject: | Re: WTB TURBO |
ok they want way too much money for kit also there not sure they have have it for this over 30 years old turbo im suppose to wait for call and find out bad news . mean while shopping around found me TD05 16G with dump pipe, oil lines complete . no shaft play very cheap picking it up tomorrow |
Author: | 4cylturb [ 29 Mar 2017, 22:44 ] |
Post subject: | Re: WTB TURBO |
That's an evo 8 turbo i believe. Your going to need a manifold to suit. Problem is the 62 head exhaust ports are different to the 63. As far as i know you'll probably need an exhaust manifold custom made. Would be very interesting to see how this turbo goes on a 4g62. |
Author: | fernandothecarguy [ 30 Mar 2017, 07:58 ] |
Post subject: | Re: WTB TURBO |
I've worked away to do it still using Original manifold |
Author: | fernandothecarguy [ 30 Mar 2017, 10:08 ] |
Post subject: | Re: WTB TURBO |
Wheres Andrew gone |
Author: | fernandothecarguy [ 30 Mar 2017, 19:19 ] |
Post subject: | Re: WTB TURBO |
before i get everything i need to make this turbo fit i need to know if its not going to work with 62 tell me now. on the exhaust side of the turbo has 2 outer holes can someone tell me why can i block 1 hole if i did what would happen? |
Author: | 4cylturb [ 30 Mar 2017, 19:38 ] |
Post subject: | Re: WTB TURBO |
Are you talking about blocking one of the exhaust entry points into the turbo? I have never heard of anyone doing that so who knows what would happen. That turbo is a twin scroll. The 62 is a single scroll. You need a twin scroll manifold to suit. If the TD turbos were easy to mate to a 62 then everyone would be doing it. Unless you custom make a manifold then i wouldn't buy that turbo. The early TD05 turbo's were single scroll. The galant vr4, evo 1, 2 & 3. I'm pretty sure there is a thread that exists on this forum of someone who matched an early TD05 to a 62 manifold. I'm pretty sure they used a big thick adapter plate because i don't think the bolt holes match up between the 62 manifold and the TD turbo. |
Author: | fernandothecarguy [ 30 Mar 2017, 19:59 ] |
Post subject: | Re: WTB TURBO |
i was going to make adapter plate to suit why or what difference does it make twin scroll putting single adapter plate with big opening |
Author: | fernandothecarguy [ 30 Mar 2017, 20:08 ] |
Post subject: | Re: WTB TURBO |
you known the funny thing they look identical to a tc06 from the inlet side exhaust can't tell the dump pipe in the way could i remove exhaust side put tc06 on it |
Author: | 4cylturb [ 31 Mar 2017, 00:28 ] |
Post subject: | Re: WTB TURBO |
fernandothecarguy wrote: i was going to make adapter plate to suit why or what difference does it make twin scroll putting single adapter plate with big opening Honestly i couldn't tell you. I'd imagine that exhaust gases coming from one hole going into 2 would create turbulence that is probably not very beneficial to the spinning of the turbine and turbo response. But i'm just guessing really. fernandothecarguy wrote: you known the funny thing they look identical to a tc06 from the inlet side exhaust can't tell the dump pipe in the way could i remove exhaust side put tc06 on it I'm pretty sure the turbine wheels are a different size. |
Author: | fernandothecarguy [ 31 Mar 2017, 10:10 ] |
Post subject: | Re: WTB TURBO |
I think is going to be a headech but not impossible to do. Thinking maybe I could swap for multipoint and get me other turbo |
Author: | fernandothecarguy [ 31 Mar 2017, 13:19 ] |
Post subject: | Re: WTB TURBO |
This turbo is of evo 4 to 10 not just evo 8 It was driven for 2 years only before car got written off. That's what I was told. So if someone wants to do a deal just pm |
Author: | fernandothecarguy [ 03 Apr 2017, 11:10 ] |
Post subject: | Re: WTB TURBO |
Hi guys got me tc06 has some shaft Play but no burning oil . My evo8 turbo going to my new engine I'm building atm yes New project will have multipoint It's going to be fun |
Author: | Bitza [ 04 Apr 2017, 18:17 ] |
Post subject: | Re: WTB TURBO |
Awesome..........the EVO turbo won't fit the 62 manifold even with an adapter plate.........surface displacement is too large. |
Author: | Wexx [ 16 May 2017, 00:03 ] |
Post subject: | Re: WTB TURBO |
What turbo that will work is the EVO 1-3 TD05-16G and dump pipe (make sure the kit has the water lines, and you will need to cut the drain in two and link it with a hose). You will need to build a new front section for the exhaust and make sure that the wastegate is under 11psi. Also the 4-wire o2 mod is recommended. I have this setup on my car, and I am waiting to get an adjustable wastegate and run a 7-10psi spring. The turbo I have opens the wastegate about 12-13psi and the car will fuel cut (if I put my foot into it). It seems happiest around 7-10psi on the engine. I'll post some pics when I get home today. Rob |
Page 1 of 1 | All times are UTC + 10 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |