It is currently 28 Mar 2024, 22:30

All times are UTC + 10 hours [ DST ]




Post new topic Reply to topic  [ 2 posts ] 
Author Message
PostPosted: 14 Mar 2004, 10:32 
Offline
Resident Antichrist
Resident Antichrist
User avatar

Joined: 03 Sep 2003, 13:39
Posts: 2367
Location: Canberra
If two or more systems are non-functional, they are indicated in order of increasing code number. Indication is made by deflection of the multimeter pointer. A constant 12 volts indicates system is normal. If system is abnormal, voltmeter will alternate between 0-12 volts every .4 seconds to display codes. After indication of zero volts for 2 seconds, the higher code is indicated.

Location: The two locations are either a 2 wire plug right next to the air cleaner or the plug above the glovebox that works the same. Note: The 83-86 have no plug above the glovebox, just the one under-hood.

NOTE: ECU abnormal diagnostic memory is kept by direct power from the battery. Memory is not erased by turning the ignition off, but will be erased if the battery or ECU is disconnected. (30 seconds)

Make sure the engine has been running a while. (10 mins) Engine must be running to check O2 Sensor.
  • 1 - Oxygen Sensor
  • 2 - Ignition Pulse
  • 3 - Air Flow Sensor
  • 4 - <Cordia/Tredia Only>
  • 5 - Throttle Position Sensor
  • 6 - ISC Motor Position Switch
  • 7 - Water Temperature Sensor

Astaroth.

_________________
[size=75]Ich will die Ruhe stören

Bones heal, chicks dig scars, glory lasts forever.

Image


Last edited by CowboyDan on 30 Jan 2006, 13:36, edited 1 time in total.

Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: 14 Mar 2004, 10:33 
Offline
Resident Antichrist
Resident Antichrist
User avatar

Joined: 03 Sep 2003, 13:39
Posts: 2367
Location: Canberra
JAPRCR - could you please post any further info you think is useful and I will incorporate it into this post?

Ta,

Astaroth.

_________________
[size=75]Ich will die Ruhe stören

Bones heal, chicks dig scars, glory lasts forever.

Image


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC + 10 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 16 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron



Connect with Cordia Power on Facebook. Cordia Power 2000-2020. Cordia Forum powered by phpBB.