It is currently 28 Mar 2024, 19:34

All times are UTC + 10 hours [ DST ]




Post new topic Reply to topic  [ 15 posts ] 
Author Message
PostPosted: 08 Oct 2006, 16:28 
Offline
Forum Regular
Forum Regular
User avatar

Joined: 14 Apr 2005, 22:33
Posts: 81
Location: Sydney
Taken from another forum

Hi Everyone!

This is my first post so play nice

I run SydneyCruising.com and we will be holding our annual Dyno night on the 21st of October at Unigroup Engineering.

We will be handing out trophies as per usual in all classes, 4's, 6's, 8's, rotary, in all variations of AWD/RWD and FWD.

If you own an AWD car as the dyno is NOT AWD, if you bring a recent dyno sheet down (last 12 months) and bring your car down you will still be eligible for a trophy in your class.

We will also have the People's Choice trophy (done by a vote on the night), and a HIGHEST HORSEPOWER CLUB trophy, for the club with the highest overall horsepower.

Where: Unigroup Engineering
Unit 17
17a Amax Avenue
Girraween NSW 2145

Date & Time: October 21st, 2006 (Saturday Night) - 4pm

Cost: $50 per car for each run
$2 for a sausage on a roll
$1 for a can of drink

All makes and models welcome, as well as spectators, friends & family, cameras etc.

I need to ensure we will have the right numbers for this, so anyone who is interested put it in your diary and confirm here in the thread along with your type of motor/induction. This also assists me in ensuring I have a trophy for your class on the night.

Hope to see you all there!

Gem

_________________
-Life starts when you get a cordia GSR
-watch out for a silver GSR crusing the streets near you!
- Work in progress


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: 08 Oct 2006, 16:37 
Offline
Forum Regular
Forum Regular
User avatar

Joined: 14 Apr 2005, 22:33
Posts: 81
Location: Sydney
So whos interested i will be going down to dyno my car hopefully and i know that roger will be dynoing his car with nitrous for the first time so it would be good to cruise to the destination and have cordias show what they are made of

_________________
-Life starts when you get a cordia GSR
-watch out for a silver GSR crusing the streets near you!
- Work in progress


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: 08 Oct 2006, 21:19 
Offline
Cordia Guru
Cordia Guru
User avatar

Joined: 27 Feb 2005, 23:44
Posts: 250
I guess ill just have to go and if your a cordia owner and dont come... FOR SHAME. Show Leo some support and come down for the day, I know I wouldnt miss it. :wink:

_________________
TopTen

"Dont be silly, I cant afford to eat, I own a Cordia!" :-D

For the best prices on Wheels & Tyres in Sydney head to http://www.toptentyres.com.au


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: 09 Oct 2006, 10:05 
Offline
Forum Regular
Forum Regular
User avatar

Joined: 18 Nov 2005, 15:56
Posts: 39
Location: sydney
i'll try to make it.

_________________
CORDIA AB VR4


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: 10 Oct 2006, 01:06 
Offline
Forum Regular
Forum Regular
User avatar

Joined: 14 Apr 2005, 22:33
Posts: 81
Location: Sydney
I wont be going unfortunetly but who ever wants to take over and organise this go for it.

_________________
-Life starts when you get a cordia GSR
-watch out for a silver GSR crusing the streets near you!
- Work in progress


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: 10 Oct 2006, 11:57 
Offline
Cordia Guru
Cordia Guru
User avatar

Joined: 27 Feb 2005, 23:44
Posts: 250
:lol:

_________________
TopTen

"Dont be silly, I cant afford to eat, I own a Cordia!" :-D

For the best prices on Wheels & Tyres in Sydney head to http://www.toptentyres.com.au


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: 16 Oct 2006, 23:06 
Offline
Cordia Guru
Cordia Guru
User avatar

Joined: 27 Jun 2004, 23:56
Posts: 435
I'll be there most likely to spectate guys, and if my full licenced mate is free might get my little bro to take down his cordia too. :)

_________________
So close yet so far.........


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: 19 Oct 2006, 22:17 
Offline
Cordia Guru
Cordia Guru
User avatar

Joined: 27 Feb 2005, 23:44
Posts: 250
yo guys looks like myself and and unnamed mate might be comming, was wondering if u guys wanted 2 cruise it down there from somewhere?

_________________
TopTen

"Dont be silly, I cant afford to eat, I own a Cordia!" :-D

For the best prices on Wheels & Tyres in Sydney head to http://www.toptentyres.com.au


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: 19 Oct 2006, 22:28 
Offline
Moderator
Moderator
User avatar

Joined: 08 Aug 2004, 21:18
Posts: 3187
Location: Almost there.....
aint that far ;) few blocks from good 'ole high school 8)

_________________
parts needed: malpassi rising rate reg and lotsa work/time
605X405X78 intercooler
D3B4ST8 is almost done 8)


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: 22 Oct 2006, 14:14 
Offline
Cordia Guru
Cordia Guru
User avatar

Joined: 27 Feb 2005, 23:44
Posts: 250
Hey boys

Was sorry we couldnt see joe dyno his car, Jay got too and so did his brother and a blue vr4 which i didnt get to see but at the end of the day I'm not sure about anyone else but I was pretty dissapointed in the venue though happy to see the cordia boys together. No offence to anyone but that place was obviously ETHNICALLY CHALLENGED. They started F*&K1*NG around with a push bike on the dyno instead of taking the time to dyno the cars and leave that till last as novelty. People were waiting like joe to get their cars dynoed FFS. People had been there since 4pm. Anyways Hicomp does it best :wink:

Cars attended:

- Blue VR4 Cordia (Unknown Nick)
- Roger Cordia
- Jay / TABA
- Jays Brother
- Joe
- White Cordia (Unknown Nick)
- Myself

_________________
TopTen

"Dont be silly, I cant afford to eat, I own a Cordia!" :-D

For the best prices on Wheels & Tyres in Sydney head to http://www.toptentyres.com.au


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: 22 Oct 2006, 14:47 
Offline
Moderator
Moderator
User avatar

Joined: 08 Aug 2004, 21:18
Posts: 3187
Location: Almost there.....
hicomp best.... :shock: personally, i'd favour another workshop 8) :P didnt they delay finishing people's cars, etc?

:P sorry i couldnt make it.

_________________
parts needed: malpassi rising rate reg and lotsa work/time
605X405X78 intercooler
D3B4ST8 is almost done 8)


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: 22 Oct 2006, 15:21 
Offline
Cordia Guru
Cordia Guru
User avatar

Joined: 27 Feb 2005, 23:44
Posts: 250
nope, hicomp has done and organised it best so far, no mucking around.

_________________
TopTen

"Dont be silly, I cant afford to eat, I own a Cordia!" :-D

For the best prices on Wheels & Tyres in Sydney head to http://www.toptentyres.com.au


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: 22 Oct 2006, 15:29 
Offline
Forum Regular
Forum Regular
User avatar

Joined: 24 Jul 2005, 01:26
Posts: 60
Location: Sydney
hey
venue was f**king shit, would advise not to go 2 a dyno nyt 2 anyone with a fwd, waste of time really, 3 n a half hours and stil not on there, if u wanna jump on the dyno to check if everythings running alrite then just leave, DO NOT GO!, 3 fwd cars left after all the 200's and silvia's (about 15), to finish off the nyt n they throw on a pushbike, like seriously wtf?, n on top of that blew the motor for there fan wif me the last car just about to start the dyno, took 6 guys working on it more then half an hour before i left n they still hadnt finished, yeh i'm wif julian that workshops pretty challenged, so yeh not that good of a nyt, but anyhow good 2 catch up wif all the cordia boys and to see how everyone was going, cyas

_________________
?


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: 22 Oct 2006, 16:33 
Offline
Moderator
Moderator
User avatar

Joined: 02 Mar 2004, 18:03
Posts: 2741
what were the power figures?
Sounds like a shit of a day!


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: 22 Oct 2006, 17:18 
Offline
This forum is my life
This forum is my life
User avatar

Joined: 15 Jun 2004, 23:15
Posts: 2258
Location: SA
mmm got ne numbers. what did the pushbike pull :D

_________________
2009 Black Xr8 Ute. Boss 290
2001 TM Racing 250EN 2T, HGS, Ohlins, brembos etc
1985 AB GSR. VR-4, LSD, Wolf, 188KW at the wheels FTW!
1984 AB GSR all in bits.
1982 JA Starion
1973 Yamaha RD 250 project cafe racer


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 15 posts ] 

All times are UTC + 10 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 10 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Connect with Cordia Power on Facebook. Cordia Power 2000-2020. Cordia Forum powered by phpBB.