Ok this is the details. I will be going anyway, so if you turn up will be good to have the company.

Few details have changed so read on.

START: Mt Colah Mc Donalds ( sorry i was thinking of the wrong suburb before)

Store Name: Mc Donalds Mt Colah

Suburb: MOUNT COLAH

Postcode: 2079

Address: 513-517 Pacific Highway Cnr Pacific Hwy & Lady Street

Phone Number: (02) 9476-8711

TIME: leave mc donalds at 10am

DESTINATION: Hornsby to Wisemans Ferry. Have a break . Then Wisemans Ferry to Pelican ( near Swansea ) for lunch. Then onto Newcastle.

CONTACT: 0407974075, pm or braddyjh@hotmail.com

ATTENDEES: Try to bring a mitsubishi, if not , bring something else.

EXTRA INFO: It is a nice drive, will need a tank of fuel id say, Bring your camera and a chair and a UHF cb if you can. There is a take away store at wisemans ferry for food and take aways near pelican for lunch. There are also bbqs if you wish to have one or bring your own.

I will be making up some pages with directions to hand out so people dont get lost, its easy to find the places where going to.

If you think of anything i missed please ask. Lets try get some attendance, for a good day of cruising.

Regards, Brad

_________________
AC GSR - vr4 2litre

Thanks for the message about the cruise. most likley ill be there.

as far as i know im not busy on that weekend so yea it should be good.

_________________
1984 AB GSR
4G62 tc05 Highflow
-----------------------------
On The List.
2.5" exhaust and new muffler
Front Mount Intercooler
Boost Guage

Hope you make it mate, hopefully more come along too.

Brad

_________________
AC GSR - vr4 2litre

Good to hear bouncy.... now we just need to get all the other Sydney guys etc motivated

where the hell is hornsby maccas? lol. (if anybody says "hornsby", something bad is going to happen to you within the next few weeks)

got a road it's on or something? for the non-hornsby locals?

_________________
parts needed: malpassi rising rate reg and lotsa work/time
605X405X78 intercooler
D3B4ST8 is almost done

Ummm good question D3bb4... ill let Brad handle that one cause F@#king useless when i hit Sydney.

I take it that means your keen D3bb4?

engines coming out this weekend.. won't be able to make it, sorry boys

_________________
CORDIA AB VR4

well my cordia is being exactly that, a blardy unreliable p.o.s atm, i got a std clutch in it and its slipping at 2psi boost :S, got a power steerin leak, g/box oil leak, goin through HEAPS of fuel, havent got cooler piping done yet, havent tuned it yet, but im trying to get it done before the cruise.. fingers crossed
if it wont be ready i'll have 2 bring the 'rolla up, but i REALLY wanta get the cordia up there..

_________________
ex MAD.48U Cordia

youll have to start working overtime on the Cordia
Im sure your old man will get in on the act? he seemed like a good bloke.
I wanna see your car again! loved the interior (playstation ) and thats was back when it had stock motor.

So looks like you got a bust weekend ahead to make sure the cordia comes

Hornsby maccas is easy to find.

If you know how to get to the start of the f3 freeway from penant hills rd thats a good start. you need to keep heading north past the start of the f3 and just stick to the pacific highway, you dont actually turn off it. there is a set of traffic lights you turn right at but just stick to pacific highway to hornsby. Hornsby maccas is on the left hand side of the road.

If your coming from sydney way head along the pacific highway to just past the freeway to the traffic lights and turn right. Then do the same as above and stick to the pacific highway until you hit maccas .

Brad

_________________
AC GSR - vr4 2litre

i'm keen on comin, only problem is, the P.O.S mechainc's keen on bein fukn lazy, and not havin my fukn car done. words dont quite express how pissed off i am. it's about 6 months late... so yehh... take a guess

_________________
parts needed: malpassi rising rate reg and lotsa work/time
605X405X78 intercooler
D3B4ST8 is almost done

Hey guys,


About the cruise I should be able to attend but possibly to the meet up only, my car is really really sick particularly the gearbox its very notchy and really is not smooth at all, nizzy can vouch for this torture I have to go through lol. But I will at least endevour to make it to the meet up to take photos etc.

Cheers,

Jay.

_________________
So close yet so far.........

hey, peoples.. any idea how long would take, etc? cause i sposed ot start work at 6, is all. cheers.

_________________
parts needed: malpassi rising rate reg and lotsa work/time
605X405X78 intercooler
D3B4ST8 is almost done

to be sure you will be back by 6 you could do 2 things.

1. go from hornsby maccas to wisemans ferry then onto somersby at the freeway with the rest of us. That will probably take till 12.30ish, then make your way back to sydney along the freeway.

2. go from hornsby maccas to wisemans ferry with us. Then when we all keep heading north you could turn around and head back the way we came and climb back up the mountain.

if you head any further north than somersby i think you may get trouble getting back by 6pm, could be crash on freeway, travel time , etc.

Those alternatives could be used by any of the sydney people if you dont want to go all the way to newcastle ( even if i think you should ).

Just do half the trip and head back.

Brad

_________________
AC GSR - vr4 2litre

cheers for that

_________________
parts needed: malpassi rising rate reg and lotsa work/time
605X405X78 intercooler
D3B4ST8 is almost done

hey guys,il b comin so thats two extra cordias n my mates in the process
of gettin his engienierd so hopefully he can make it too.as for headin up to newy im gona just come to the meet,not to keen in goin or the way up if my car aint runnin and lookin 100 percent so il just b ripping it up in syd,
for all of u guys that want to stay in syd for particular reasons ur welcome to join me

_________________
finally the cordia cartel is here

Good to hear cordiacartel... at least your makin an effort to show up.
Tell your friend not to worry about the engineers certificate... odds arent very high of getting pulled over and just tell them its in the process of getting engineered.

I will try to make it to hornsby macca's for the meet up, but cant go on the journey as i have to work at 5pm in North Sydney and dont really feel like rushing around on a sunday. Ill have to give it a good wash so that its looking its best.
Dan

i have a wedding on in the arvo.. but i will make it to horsby in the morning see you guys there...

Sounds like we have a few more numbers now even if some are just doing the Sydney scene... will be good to see your cordias. I got hold of the guy who owns one of my old cordias and he's keen too

so its looking good.

Maybe we can organise something with alot of notice so that all who come on sunday have time to plan etc so we can make a big day out of it in say 2 months? and hopefully those who's cordias arent running at the moment will be able to make it too