It is currently 29 Mar 2024, 08:33

All times are UTC + 10 hours [ DST ]




Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: Injector advice
PostPosted: 29 Jan 2018, 09:07 
Offline
Member
Member

Joined: 08 Jun 2017, 06:25
Posts: 12
Gender: Male
Your car: 1987 Mitsubishi Lancer EX 1800 GSR
1981 Mitsubishi Lancer EX GSL
Hi guys,

Don't have a Cordia, but rather a Lancer EX with a G62B Turbo engine - same as Cordias.

I was hoping someone can tell me the rating, part numbers, or alternative parts for the stock injectors as I'd like to replace mine with new ones. My engine has the 'B-Type' injection setup as shown below and is a 1987 model if that helps:

Image

Appreciate any comments or advice, thanks!


Top
 Profile  
Reply with quote  
 Post subject: Re: Injector advice
PostPosted: 01 Feb 2018, 02:24 
Offline
Forum Regular
Forum Regular

Joined: 08 May 2015, 07:22
Posts: 82
Gender: Male
http://www.racetronix.biz/itemdesc.asp? ... 42&eq=&Tp=

Try to find a spare fuel rail to modify. You will need to enlarge the injector holes a bit and take the filters out since the newer injectors have filters in the feed ends. You will also need some spacers to raise the fuel rail up with longer bolts. I think the connectors are the same. I'll be doing this mod to my Cordia soon.

Rob


Top
 Profile  
Reply with quote  
 Post subject: Re: Injector advice
PostPosted: 12 Feb 2018, 19:07 
Offline
Member
Member

Joined: 08 Jun 2017, 06:25
Posts: 12
Gender: Male
Your car: 1987 Mitsubishi Lancer EX 1800 GSR
1981 Mitsubishi Lancer EX GSL
Thanks Wexx, I'm ideally looking for something to fit without mods, but I'll hit those guys up if I need to go that route :)

So it seems that they're both likely ~800cc each? I think I read somewhere that the AB and AC Cordia have two different setups (1x large and 1x small injector, or 2x same size injectors), but I'm not sure which model years are the AC or AB, but my setup is likely to be similar, if not identical to the later model ones, or does only Starion have this setup?

Sorry, I don't know much about Cordia's at all :P


Top
 Profile  
Reply with quote  
 Post subject: Re: Injector advice
PostPosted: 13 Feb 2018, 16:58 
Offline
This forum is my life
This forum is my life
User avatar

Joined: 10 Jun 2006, 00:35
Posts: 3644
Location: Adelaide South Australia
Gender: Male
Your car: DOHC 2.3 VR4 85 AB GSR
Immaculate Stock 86 AC GSR
AA, AB 1983 to 1985 run the black top injectors (800cc), AC 1986 to 1988 run the grey tops (750cc), hope this helps.


Top
 Profile  
Reply with quote  
 Post subject: Re: Injector advice
PostPosted: 18 Feb 2018, 18:47 
Offline
Member
Member

Joined: 08 Jun 2017, 06:25
Posts: 12
Gender: Male
Your car: 1987 Mitsubishi Lancer EX 1800 GSR
1981 Mitsubishi Lancer EX GSL
Bitza wrote:
AA, AB 1983 to 1985 run the black top injectors (800cc), AC 1986 to 1988 run the grey tops (750cc), hope this helps.


Thanks Bitza, this should help a lot. When you say grey & black top injectors, is it the connector colour or something else? I haven't had my throttle body apart, nor am I familiar with them :P


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC + 10 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 22 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron



Connect with Cordia Power on Facebook. Cordia Power 2000-2020. Cordia Forum powered by phpBB.