The intercooler looks to be one of the good copies, nice buy. This thing is starting to come along nicely man, I cant wait to see it at a cruise once your done


Funny story: A mate of mine ordered an ebay cooler once (it was one of the shitty ones) and the cooling fins did not even protrude to the other side, lol.
All it did was block air from getting to the radiator.

_________________
|VR4 4G63 RS|MicroTech lt8s|Ported TD06sl2-25g|Ported & Polished Head|HKS Front Mount|3" Exhaust|
|Coilovers|Swaybars|VR-4 2pot Calipers|TP rears|Evo3 Master/Booster|Evo 3 front bar|Side Skirts|Rear Lip|

very nice, looks like its a very good copy

_________________
For Sale
AA White GSR, hiflow TC06, reco Motor, 3inch exhause, k&n air cleaner
viewtopic.php?f=5&t=16477
All my Cordia Parts For Sale make an Offer
viewtopic.php?f=6&t=15917

you have to go for the KLS powerspirit coolers there the best ones , this ones for a evo 7/8/9 bolt on setup , its not to large but I will pressure test it before using it because you never know

I just bought one of these this morning
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 2911wt_924

hopefully it fits ok, I can custom fit it pretty easy though

now looking for a 044 fuel pump and a surge tank, plus multipoint and ecu ( microtech or wolf3d )

thats crazy about the blocked off cooler though

_________________
AA Silver saved,4g62t SOHC,Td05,FMIC
AB Silver bullet in the build, 4G62T DOHC
AB Silver original unrestored 1 owner car
AC Wanted $$$(must have 4g62t, or I can swap it back)

last cordia:
Blue 88 GSR turbo AC with 62t, TD05 14B and FMIC
(I WOULD LIKE IT BACK IF POSSIBLE, OLD REG SYH354)

very nice mate will be looking in to them for that price. cant beleave they can even sell coolers like that. people just dont care some times

_________________
For Sale
AA White GSR, hiflow TC06, reco Motor, 3inch exhause, k&n air cleaner
viewtopic.php?f=5&t=16477
All my Cordia Parts For Sale make an Offer
viewtopic.php?f=6&t=15917

trav just a question mate?? know its somthing that all of us cordia guys have all was wanted to see
can you make up a post with you cordia build with all the 4wd work and the motor build up.
it will be insperation for a lot of guys and hope it will make more people give this convert a good go

_________________
For Sale
AA White GSR, hiflow TC06, reco Motor, 3inch exhause, k&n air cleaner
viewtopic.php?f=5&t=16477
All my Cordia Parts For Sale make an Offer
viewtopic.php?f=6&t=15917

will do Doug, Im keen to get it going, but I will run a 4G63 DOHC when I put all that in , theres a bit of extra fab work to be done with crossmembers etc , I might even buy another cordia for a dummy fit process unitl its 100%

I got to meet Davey today , nice to chat with another cordia fan, keep my posted on how your car goes

but I did get the motor out today , the turbo has had something hit the blades at some stage, the rear main was toast as the gearbox is covered in oil.
the excedy clutch was not to bad but did have a few hotspots on the cover and flywheel , still had a few launches left it , and one of the driveshafts had a split boot. so Im going to replace the lot while there out along with sway bar rubbers and tie rod ends

has anyone fitted VR4 front struts in the cordia ?

_________________
AA Silver saved,4g62t SOHC,Td05,FMIC
AB Silver bullet in the build, 4G62T DOHC
AB Silver original unrestored 1 owner car
AC Wanted $$$(must have 4g62t, or I can swap it back)

last cordia:
Blue 88 GSR turbo AC with 62t, TD05 14B and FMIC
(I WOULD LIKE IT BACK IF POSSIBLE, OLD REG SYH354)

They fit with cordia tops . way too soft though


Wanna buy my pedders reco'ed coilovers? you can have them cheap as chips, let me know if ur interested?

_________________
|VR4 4G63 RS|MicroTech lt8s|Ported TD06sl2-25g|Ported & Polished Head|HKS Front Mount|3" Exhaust|
|Coilovers|Swaybars|VR-4 2pot Calipers|TP rears|Evo3 Master/Booster|Evo 3 front bar|Side Skirts|Rear Lip|

pm a pic Koray and what sort of dollars your looking for



here is some progress over the weekend , hopefully fire it up soon. found alot of broken bits, the rear main was leaking real bad , the rear engine mount was totally broken, driveshaft boots are split

_________________
AA Silver saved,4g62t SOHC,Td05,FMIC
AB Silver bullet in the build, 4G62T DOHC
AB Silver original unrestored 1 owner car
AC Wanted $$$(must have 4g62t, or I can swap it back)

last cordia:
Blue 88 GSR turbo AC with 62t, TD05 14B and FMIC
(I WOULD LIKE IT BACK IF POSSIBLE, OLD REG SYH354)

intersting colours, looks good though...

_________________
Quench my thirst with gassoline!

AHHHHHHHHH its so BRIGHT!!! did you do a rebuild at all?

_________________
"hahhahahhaa its good its got straw for a pipe frontn.... the bigger that hole gets the more money falls out of ur wallet... "



Epic i must say.

Ewww...........why purple?

all i have to say is wow. where on earth did you find that motor???

looks like you have been having fun.
do you have kids now trav i see a kid bike in the back ground

_________________
For Sale
AA White GSR, hiflow TC06, reco Motor, 3inch exhause, k&n air cleaner
viewtopic.php?f=5&t=16477
All my Cordia Parts For Sale make an Offer
viewtopic.php?f=6&t=15917

Why is the alternator silver? lol. I would love to see a cop pop your bonnet.

_________________
|VR4 4G63 RS|MicroTech lt8s|Ported TD06sl2-25g|Ported & Polished Head|HKS Front Mount|3" Exhaust|
|Coilovers|Swaybars|VR-4 2pot Calipers|TP rears|Evo3 Master/Booster|Evo 3 front bar|Side Skirts|Rear Lip|

LOL that engine bay is just gonna look like shit haha! Paint your alternator to suit.
Besides that i'm sure mechanically its great.
Keep up the great work!

_________________
FRONTN-Cordia GSR |Tim|
|VR4 4G63BT|MicroTech LT8S|E7RS 9.8T TD05HR|560cc|Buddyclub P1|White on white||evo 2 brakes|
167fwkw @ 8200rpm 400nm (16psi)

PS: Lol @ spell check, it doesn't even know what a "Cordia" is.

Thanks Jimi


its had a freshn up and a 272/264 cam , Im getting new timming belt kit, etc just because Im not sure how long its been sitting


My last one was red and blue, I though just to go abit crazy this time


I got it off Nick ( 2much ) . it was the one out of his cordia before he went twin cam

yep I got a 1yo named David




I wasnt sure what color to go with on the altinator, I was thinking it might be overkill , but when the turbo setup is on there it will blend in


hopefully it hold up , Im not sure how its all going to turn out, Ive ordered some green vaccum line also , plus I will get some blue in there also

_________________
AA Silver saved,4g62t SOHC,Td05,FMIC
AB Silver bullet in the build, 4G62T DOHC
AB Silver original unrestored 1 owner car
AC Wanted $$$(must have 4g62t, or I can swap it back)

last cordia:
Blue 88 GSR turbo AC with 62t, TD05 14B and FMIC
(I WOULD LIKE IT BACK IF POSSIBLE, OLD REG SYH354)

good work mate my daughter is almost 2. they are good fun.

looks like you are having fun with the cordia will have to come have a look

_________________
For Sale
AA White GSR, hiflow TC06, reco Motor, 3inch exhause, k&n air cleaner
viewtopic.php?f=5&t=16477
All my Cordia Parts For Sale make an Offer
viewtopic.php?f=6&t=15917

congrates Doug, there alot of fun and work at the same time , mine will be 2 years old in October, probly fairly close to each other also

come by anytime mate

my number is 0421422392

also got today
new fan belts
new rotor button
new dizzy cap
new rocker cover gasket kit
new NGK leads
kill switch ( key type )

_________________
AA Silver saved,4g62t SOHC,Td05,FMIC
AB Silver bullet in the build, 4G62T DOHC
AB Silver original unrestored 1 owner car
AC Wanted $$$(must have 4g62t, or I can swap it back)

last cordia:
Blue 88 GSR turbo AC with 62t, TD05 14B and FMIC
(I WOULD LIKE IT BACK IF POSSIBLE, OLD REG SYH354)

will do mate. keen to see how your going with it all i get my cordia this weekend so my new journy begins. the body is stuffed

_________________
For Sale
AA White GSR, hiflow TC06, reco Motor, 3inch exhause, k&n air cleaner
viewtopic.php?f=5&t=16477
All my Cordia Parts For Sale make an Offer
viewtopic.php?f=6&t=15917

I got this fan also as it looked like a pretty powerfull setup for the price ( 2750cfm ) ,
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... _597wt_911

now looking at brake lines for the twin pots , would Magna braided lines fit ?, I might borrow a magna line off a friend to check then get them made up, and also getting clutch line made at the same time

also got a
genuine mits oil filter and oil
genuine mits fuel filter
Diaqueen gearbox oil ( 75w85 )
genuine mits coolant
excedy clutch kit of daveys
found some shell helix race brake and clutch fluid at home

the list is slowly getting smaller

_________________
AA Silver saved,4g62t SOHC,Td05,FMIC
AB Silver bullet in the build, 4G62T DOHC
AB Silver original unrestored 1 owner car
AC Wanted $$$(must have 4g62t, or I can swap it back)

last cordia:
Blue 88 GSR turbo AC with 62t, TD05 14B and FMIC
(I WOULD LIKE IT BACK IF POSSIBLE, OLD REG SYH354)

you really need to start a post for the build and listing all the time and work that you are puting in to it

_________________
For Sale
AA White GSR, hiflow TC06, reco Motor, 3inch exhause, k&n air cleaner
viewtopic.php?f=5&t=16477
All my Cordia Parts For Sale make an Offer
viewtopic.php?f=6&t=15917