HID bulbs and ballasts??? But not HID projectors? If so, not a good idea. Need to retrofit projectors. I'm looking to do that soon
Looks mint
what vent's going into the bonnet?
| Cordia Forum https://www.cordiapower.com/forum/ |
|
| Update: Plysha's Cordia (Engine's In!!!) https://www.cordiapower.com/forum/viewtopic.php?f=12&t=14467 |
Page 4 of 9 |
| Author: | D3bb4 [ 19 Oct 2010, 10:50 ] |
| Post subject: | Re: Update: Plysha's Cordia |
HID bulbs and ballasts??? But not HID projectors? If so, not a good idea. Need to retrofit projectors. I'm looking to do that soon Looks mint what vent's going into the bonnet?
|
|
| Author: | S1VART [ 19 Oct 2010, 13:37 ] |
| Post subject: | Re: Update: Plysha's Cordia |
cordiaaaturbo wrote: S1VART wrote: looking good , mine has the same front rail dint , its in the same place too the white looks very clean i was wondering about that one, as i think mine has it too hehe is it normal? looks bloody great. factory rail dint 
|
|
| Author: | Plysha [ 08 Nov 2010, 20:22 ] |
| Post subject: | Re: Update: Plysha's Cordia |
Another quick update. I've managed to now almost have all my brakes installed and complete. Finished fitting up the evo 3 master cylinder and booster, along with a galant brake bias unit. Just need to get some braided lines made up for the front and rear calipers and then thats it for the brakes. Also test fitted the front grill and headlight apron, just needs another quick coat of paint and it should be ready to fit.      
|
|
| Author: | JiMi [ 08 Nov 2010, 20:26 ] |
| Post subject: | Re: Update: Plysha's Cordia |
looking good |
|
| Author: | Bitza [ 08 Nov 2010, 21:37 ] |
| Post subject: | Re: Update: Plysha's Cordia |
Brake booster and master looks familiar. |
|
| Author: | Plysha [ 08 Nov 2010, 22:57 ] |
| Post subject: | Re: Update: Plysha's Cordia |
Bitza wrote: Brake booster and master looks familiar. He-he yes it does hey.  Actually if it wasn't for your knowledge bitza i would have not realised that i should install the gallant bias unit, so cheers mate. Hopefully somewhere down the track i can upgrade the fronts again to the 3000gt combo.
|
|
| Author: | cordiaaaturbo [ 09 Nov 2010, 13:58 ] |
| Post subject: | Re: Update: Plysha's Cordia |
Looking good man! |
|
| Author: | S1VART [ 09 Nov 2010, 15:47 ] |
| Post subject: | Re: Update: Plysha's Cordia |
looks awesome , so clean in white |
|
| Author: | Plysha [ 09 Dec 2010, 16:10 ] |
| Post subject: | Re: Update: Plysha's Cordia |
It's been a while but another update none the less. Braking system is complete, all corners now have their braided lines installed. I've just received my new shiny aluminium radiator today, and test fitted to ensure it will work. Its an evo 3 item which is roughly the same size as the original cordia unit. I was a little unsure at first as to whether it would work, but checks out fine and the bonnet will close without any issues. Just got to fab up some custom mounts for it and a lager grommet for the underneath. Also installed some slimline fans while i was at it. Not sure at this stage but thinking of spraying the radiator matt black too. I've also started work on getting the valve cover all smooth and ready for powder-coating. The motor is down with Jon of the forums here getting rebuilt. Fingers crossed it will be done by Christmas but ill get some pics and specs of it up once is done. Some more pic's below for now, ill try to get some more up of the other parts I've ordered ready to be installed soon.      
|
|
| Author: | ETHER_ONE [ 09 Dec 2010, 17:07 ] |
| Post subject: | Re: Update: Plysha's Cordia |
Just a personal opinion but i think the radiator is too nice to paint. |
|
| Author: | cordiaaaturbo [ 09 Dec 2010, 20:56 ] |
| Post subject: | Re: Update: Plysha's Cordia |
Hey man, how much did the rad and fans set up back? looks bloody nice! |
|
| Author: | JiMi [ 09 Dec 2010, 22:05 ] |
| Post subject: | Re: Update: Plysha's Cordia |
agreed.. everything about this car is drool worthy |
|
| Author: | S1VART [ 10 Dec 2010, 11:20 ] |
| Post subject: | Re: Update: Plysha's Cordia |
coming up very nice , makes me want to run home and start putting mine back together |
|
| Author: | Plysha [ 15 Jan 2011, 03:47 ] |
| Post subject: | Re: Update: Plysha's Cordia |
Thought i'd better throw up a couple of quick update pics (thanks Jon) for you guys. Still a long way to go before its ready to drive but hey, progress in any form is always good   
|
|
| Author: | gsr-007 [ 15 Jan 2011, 17:15 ] |
| Post subject: | Re: Update: Plysha's Cordia |
mate there is some a class work going in to this car keep it up, its going to be one of the best cordia around when done |
|
| Author: | FRONTN [ 15 Jan 2011, 19:34 ] |
| Post subject: | Re: Update: Plysha's Cordia |
Wow this thing is looking sooo good! Too good! Luv it! |
|
| Author: | JiMi [ 15 Jan 2011, 20:42 ] |
| Post subject: | Re: Update: Plysha's Cordia |
aye.. white cordias rule... best colour imho they look so clean |
|
| Author: | Jon [ 16 Jan 2011, 20:05 ] |
| Post subject: | Re: Update: Plysha's Cordia |
Seeing this car today, and all the bits going into it, the attention to detail....it's going to be a very very nice car. |
|
| Author: | S1VART [ 17 Jan 2011, 12:17 ] |
| Post subject: | Re: Update: Plysha's Cordia |
I was looking for a white one too looks great, cant wait to hear that motor on the he dyno |
|
| Author: | Plysha [ 26 Jan 2011, 18:31 ] |
| Post subject: | Re: Update: Plysha's Cordia |
A couple more pics taken from the last week or two while moving the car down to Jon's workshop. Ignore the car's colour it was covered in dust, enjoy       
|
|
| Page 4 of 9 | All times are UTC + 10 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|