Hey all i made a small topic in the forum and was going to post pic's up but i decided to make a new topic and to put more detail into it.

firstly for the people who dont know me , or do know me but dont know my in real name , its Jason , i have been registerd on this forum for some time but went away for ages then came back , im 21 years old and still on my green P plates , i have had my cordia for a good 5 years and slowly starting to get her on the road , i have alot of things i want to do to it but at the moment this is what i have , ill post the links to the album so you guys can check out my cordia , i hope u do like it and yes i know i have alot of work to do on her , but i can do it!!!! anyway here are some pic's please comment on it dont be shy hehehe thnx fellas!!!!

http://img29.imageshack.us/gal.php?g=p9010323.jpg

for future referance i want to do these mods : buy a nice looking boost guage and install it to give it that extra sexy look when in the driver seat :p , im going to attach my hotdog muffler when i get it over the pits as if i install it now it might be to loud and they may fail the inspection (there pricks here) , install a intercooler , attach my BOV to my cross over pipe , buy a new sporty steering wheel , fully metalic silver paint job , and hopefully a fibremastyer body kit! ow yea and some new rims i dont really like the ones that are on it now.

so far that is all anyway Click the link all my pictures are in there and comment please tell me what u think

cheers , jason

I like your dedication.............keep it up Jason.

thnx mate once i get rid of those stock rims and put some nice ones on it will look alot better hehe

Looks like you got some nice plans, keep up the good work!!


About the nice rims, damm they are expensive to ship to your area mate.

_________________
|VR4 4G63 RS|MicroTech lt8s|Ported TD06sl2-25g|Ported & Polished Head|HKS Front Mount|3" Exhaust|
|Coilovers|Swaybars|VR-4 2pot Calipers|TP rears|Evo3 Master/Booster|Evo 3 front bar|Side Skirts|Rear Lip|

how much where they. ?

lol, you don't want to know (it’s a joke!!!), but ill tell you anyway. I called around 15 companies and the cheapest quote being OVER $500!!! (That’s to your postcode in Perth)

However shipping costs to Sydney or Adelaide is muuuuuuuuch cheaper, Less than half of what it is to Perth.

_________________
|VR4 4G63 RS|MicroTech lt8s|Ported TD06sl2-25g|Ported & Polished Head|HKS Front Mount|3" Exhaust|
|Coilovers|Swaybars|VR-4 2pot Calipers|TP rears|Evo3 Master/Booster|Evo 3 front bar|Side Skirts|Rear Lip|

wow fudge that lol.

I know, tell me about it. I got quotes for both palet and box shipping and the price didnt change much.

_________________
|VR4 4G63 RS|MicroTech lt8s|Ported TD06sl2-25g|Ported & Polished Head|HKS Front Mount|3" Exhaust|
|Coilovers|Swaybars|VR-4 2pot Calipers|TP rears|Evo3 Master/Booster|Evo 3 front bar|Side Skirts|Rear Lip|

nice Cordia

shipping is way to expensive these days

_________________
AA Silver saved,4g62t SOHC,Td05,FMIC
AB Silver bullet in the build, 4G62T DOHC
AB Silver original unrestored 1 owner car
AC Wanted $$$(must have 4g62t, or I can swap it back)

last cordia:
Blue 88 GSR turbo AC with 62t, TD05 14B and FMIC
(I WOULD LIKE IT BACK IF POSSIBLE, OLD REG SYH354)

thnx king!

my friend shipped a set of oz racing rims from QLD to Vic for $80 but they went on the Vline bus , it did take abit longer and they had to be droped off at the bus depot and also pick up from the depot , it might be another way around it

_________________
AA Silver saved,4g62t SOHC,Td05,FMIC
AB Silver bullet in the build, 4G62T DOHC
AB Silver original unrestored 1 owner car
AC Wanted $$$(must have 4g62t, or I can swap it back)

last cordia:
Blue 88 GSR turbo AC with 62t, TD05 14B and FMIC
(I WOULD LIKE IT BACK IF POSSIBLE, OLD REG SYH354)

haha , geez lol

i sold a set of commodore rims a while back on ebay (payed $100 for em, sold em on ebay a week later for 500) and the guy got them sent to qld by bus as well.

_________________
Quench my thirst with gassoline!

just got my boost guage gunna install it within a few days here is a pic



couple more with the lights off i love the colour of it doesnt look to bad when the lights are off either .

Nice! Did you end up getting a wiring diagram with it?

_________________
|VR4 4G63 RS|MicroTech lt8s|Ported TD06sl2-25g|Ported & Polished Head|HKS Front Mount|3" Exhaust|
|Coilovers|Swaybars|VR-4 2pot Calipers|TP rears|Evo3 Master/Booster|Evo 3 front bar|Side Skirts|Rear Lip|

ill see when i get it hahahha , i won it cost 45 bucks so i did pretty good

Nice one Jason, should look great at night.

looks good , good buy

_________________
AA Silver saved,4g62t SOHC,Td05,FMIC
AB Silver bullet in the build, 4G62T DOHC
AB Silver original unrestored 1 owner car
AC Wanted $$$(must have 4g62t, or I can swap it back)

last cordia:
Blue 88 GSR turbo AC with 62t, TD05 14B and FMIC
(I WOULD LIKE IT BACK IF POSSIBLE, OLD REG SYH354)

thnx mate yea it should look awsome !!! im happy with it i got it pretty cheap , shit in western australia isnt cheap , normal water , oil temp guages cost 70 bucks each and there just normal whitel looking ones

good guy mate you must be happy looks like a good win

_________________
For Sale
AA White GSR, hiflow TC06, reco Motor, 3inch exhause, k&n air cleaner
viewtopic.php?f=5&t=16477
All my Cordia Parts For Sale make an Offer
viewtopic.php?f=6&t=15917