Cordia Forum
https://www.cordiapower.com/forum/

Junkman690's Cordia
https://www.cordiapower.com/forum/viewtopic.php?f=12&t=16790
Page 2 of 2

Author:  junkman690 [ 19 Mar 2012, 12:34 ]
Post subject:  Re: Junkman690's Cordia

I removed the cluster (was replacing the clear plastic as it had a crack, removed the needles by hand. Got a small razor blade to scrape off all the old paint, then bought some $2 acrylic paint and a small paintbrush and gave a few coats only on the underside of the needles. This allows for the light to still travl through the needle itself. Its not a very difficult job, only had part is realligning the needles. I think i put my fuel one on a bit high...... lol

Author:  junkman690 [ 22 Mar 2012, 19:16 ]
Post subject:  Re: Junkman690's Cordia

Better pic

Image

Shiny new amp

Image

Image

Also made a new rear shelf as the old one was bowing, and the speakers were hitting the subs when i reverse mounted them

Image

New bass remote

Image

Which fits in here perfectly

Image

Author:  Bitza [ 22 Mar 2012, 19:37 ]
Post subject:  Re: Junkman690's Cordia

Nice set up............hope your running nothing under a 2 farad capacitor!

Author:  junkman690 [ 22 Mar 2012, 20:32 ]
Post subject:  Re: Junkman690's Cordia

I got a 4 farad cap beside me, but selling it, not bothering putting it in the car. the battery i have in it atm responds pretty well, even with that monster amp

Author:  S1VART [ 30 Mar 2012, 14:08 ]
Post subject:  Re: Junkman690's Cordia

that stereo must sound real nice, I like the Eunos 30x ( nick name : Dirty EX ) you have there also i use to work at Mazda

Author:  junkman690 [ 31 Mar 2012, 16:21 ]
Post subject:  Re: Junkman690's Cordia

It does have pretty decent sound quality, I just miss the screen.... Because at the moment I can't change the volume or the track without using my phone to control the PC :(

Author:  attycuz [ 12 Jun 2012, 17:38 ]
Post subject:  Re: Junkman690's Cordia

2dmentd - im not sure but i read somewhere you can buy paint for them? Look heaps good! Got that planned for mine too

Page 2 of 2 All times are UTC + 10 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/