Cordia Forum
https://www.cordiapower.com/forum/

Mitsubishi Galant 1987, 4G63BT, RALLIART
https://www.cordiapower.com/forum/viewtopic.php?f=12&t=16832
Page 8 of 9

Author:  Tomica93 [ 17 May 2016, 07:27 ]
Post subject:  Re: Mitsubishi Galant 1987, 4G63BT, RALLIART

Disassembled front subframe

Image

Some new parts

Image

Took out the bushings front front subframe, they were in really bad condition, as you can see on the picture, new oem ones are ready to pop in

Image

also new stoppers

Image

Image

New gasket for fuel sender unit

Image

New grommet for hood pin

Image

Then i have to install new seals in the steering rack, and also new rod ties, rod tie ends and new boots

Image

Image


New boot for steering rack

Image


Dont have picture when shafts were finished, but painted them to OEM colour

Image

Painted brackets for front subframe

Image

Installed and painted slave clutch cylinder

Image

Custom made full rubber front engine mount

Image

Polyurethane SuperPro bush on sway bar

Image

Finally made an adapter for EVO ISC to DSM wire installation

Image

Author:  S1VART [ 17 May 2016, 13:08 ]
Post subject:  Re: Mitsubishi Galant 1987, 4G63BT, RALLIART

awesome update the iSC adaptor is a good idea

Author:  fernandothecarguy [ 23 May 2016, 16:16 ]
Post subject:  Re: Mitsubishi Galant 1987, 4G63BT, RALLIART

nice all brand new.
i bet the inside car will have brand new car smell when his finished :P

Author:  Tomica93 [ 07 Jun 2016, 23:16 ]
Post subject:  Re: Mitsubishi Galant 1987, 4G63BT, RALLIART

Assembled complete front subframe, car really drives fantastic now, no sounds at all, and brakes, AWESOME, it has the stopping power now

also to make it a little softer i have made custom springs, front 5,6kg/mm and rears 3,5kg/mm

Image

Calipers refurbed, new, bolts, paint and stickers, little before/after

Image

Image

Image

Image

It fitted very nice :D

Image

New blood

Image

At the geometry service

Image

Image


And got the fluidampr crank pulley & ARP bolts

Image

Author:  GORAN [ 08 Jun 2016, 09:30 ]
Post subject:  Re: Mitsubishi Galant 1987, 4G63BT, RALLIART

Nice work, well done.

Author:  fernandothecarguy [ 08 Jun 2016, 16:41 ]
Post subject:  Re: Mitsubishi Galant 1987, 4G63BT, RALLIART

very nice magna or should i say galant :)

Author:  S1VART [ 08 Jun 2016, 17:07 ]
Post subject:  Re: Mitsubishi Galant 1987, 4G63BT, RALLIART

must feel great to drive now

also I havent see that oil filter for awhile , we use MD356000 now in Aus

Author:  Tomica93 [ 09 Jun 2016, 08:06 ]
Post subject:  Re: Mitsubishi Galant 1987, 4G63BT, RALLIART

this one was ordered from US

Author:  S1VART [ 09 Jun 2016, 09:46 ]
Post subject:  Re: Mitsubishi Galant 1987, 4G63BT, RALLIART

thats the Value selection range, nothing wrong with them there good filters, shame they dont sell them in aus anymore

Author:  Tomica93 [ 22 Jun 2016, 11:36 ]
Post subject:  Re: Mitsubishi Galant 1987, 4G63BT, RALLIART

Few more updates

new rear steel brake feed lines

Image

installed fluidampr crank pulley, and also new Gates, alternator and power steering belt

Image

looks good underneath now :)

Image

Got brand new OEM front grille

Image

Image

Adjustable rear dampers came in, Cusco, newer dampers, and also they are longer for 1cm, which means a little more street friendly

Image

Comparasion to a non adjustable CUSCO

Image

and one nice pic from the petrol station

Image

Author:  GORAN [ 22 Jun 2016, 11:47 ]
Post subject:  Re: Mitsubishi Galant 1987, 4G63BT, RALLIART

Hi mate,

I just noticed that you are from my neck of the woods :)

ZG plates standing for Zagreb?

hehe good stuff

"Fino auto , drago mi je da vidim da se voze takva auta kod nas" Pozdrav

Sorry guys, brushing up on my second language skills :)

Author:  Tomica93 [ 22 Jun 2016, 17:05 ]
Post subject:  Re: Mitsubishi Galant 1987, 4G63BT, RALLIART

yep, Zagreb

Iam alone with my friend. No one else have it here :)

Author:  Tomica93 [ 28 Jul 2016, 18:45 ]
Post subject:  Re: Mitsubishi Galant 1987, 4G63BT, RALLIART

Little update, havent been working on a car. I was driving it for a change, done over 3000km over the last 3months

In front of Pula Arena

Image

then i was on a oldtimer meeting, with my dad(green 4gen Galant), and a good friend of mine with his RalliArt version also in white. That was a pretty cool sight

Image

Image

Image

Image

And some better photos of mine car :)

Image

Image

Image

Image

Image

Image

Author:  4cylturb [ 29 Jul 2016, 18:13 ]
Post subject:  Re: Mitsubishi Galant 1987, 4G63BT, RALLIART

Beautiful car. Really nice job!

Author:  fernandothecarguy [ 30 Jul 2016, 15:48 ]
Post subject:  Re: Mitsubishi Galant 1987, 4G63BT, RALLIART

nice job .
you should be proud ;)

Author:  Tomica93 [ 02 Aug 2016, 18:36 ]
Post subject:  Re: Mitsubishi Galant 1987, 4G63BT, RALLIART

guys with bigger power


how do you solve an issue with clicking CV joints??


for guys over 400Nm, i have put 2replacement CV joint, but after 3000km I allready hear some light clicking in the corners.
Is the OEM stuff only little longer solution, or are there any uprated parts?


Thanks for responds

Author:  Tomica93 [ 21 Jan 2017, 09:56 ]
Post subject:  Re: Mitsubishi Galant 1987, 4G63BT, RALLIART

Couple more updates

Crankpreassure was next thing to deal with, no more oil dip stick popping out and inlet on turbo is now dry :)

so I have made a custom valve cover, drilled a much larger hole, and weld bigger fitting, removed PCV valve and also put a bigger one, but left the thread in case i will want to return PCV :)

after that, professional coat was apllied

Image


difference between holes

Image

New oil Catch can and silicone hose

Image



Then few shots from the sea and driving :)

Image

Image

Image

Image

Image

Then got new silicone clear hose for washerfluid line, so I have replaced an old ugly one :)

Image

Image


Thats all for now :)

Author:  Tomica93 [ 22 Jan 2017, 22:02 ]
Post subject:  Re: Mitsubishi Galant 1987, 4G63BT, RALLIART

Next thing to deal with was the power windows switch.

First they started to fail on the main one (passanger window couldnt go up) and also letters worn out after years of using

First i have disassembled everything, cleaned up the contacts, and it all woreked again like a charm

Image

Image

Image




Then i found a ultra rare JDM main power window switch that has Door Lock option on it and AUTO funstion for drivers window.
It was in Malaysia, and it is very very hard to communicate with them and in the end to get parts from

So i accepted a challenge of making a UNIQUE, only in the world, LHD main switch with AUTO power windows on drivers doors, and Door lock option

Image

And finally received it after 2months

Image


Next big problem was it was all for RHD (you cant put AUTO function on the left side) and also you need to use LHD plastic surround to fit properly
However plastic surround didnt have DOOR LOCKS sign


after days of researching, find up it wasnt a sticker on the buttons and plastic surround. It was printed with high quality colour that remains under usage of fingers
luckily i found one guy who was able to do this for me, so i have also refurbed buttons and plastic surround, also all other buttons on passanger doors

Image


next thing about AUTO function. Mitsubishi Galant Sigma in USA had AUTO function on driver window as a LHD. luckily found one with broken plastic and cutted wires, but again seller didnt want to ship, so I had to find agents etc.
after 2more months finally item arrived


Image



next problem was it didnt have DOOR LOCK, so i had to cut the JDM one and weld it with USA one

Image



Next. all was working except AUTO function for driver window when it go UP.
Thing is, in the US there was a child proof law. so the button had some kind of restriction, and also 1wire was missing from the small control unit plate (white wire in the picture above was added).


When it all was solved , here is the final result

Image

From 3very rare parts, I got 1 Unique with all functions working :)
Final result: astonishing :D

Image

Author:  Punchy86 [ 25 Jan 2017, 00:16 ]
Post subject:  Re: Mitsubishi Galant 1987, 4G63BT, RALLIART

I used to have a tn magna( aussie version) same shape none the less, but wow you have done a awesome job with the build and so much time and effort. Im jelous lol 10/10 i say!

Author:  Tomica93 [ 25 Jan 2017, 07:20 ]
Post subject:  Re: Mitsubishi Galant 1987, 4G63BT, RALLIART

thanks, you dont have to be jelous :)

Page 8 of 9 All times are UTC + 10 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/