Cordia Forum https://www.cordiapower.com/forum/ |
|
AB Cordia Turbo https://www.cordiapower.com/forum/viewtopic.php?f=12&t=17279 |
Page 2 of 5 |
Author: | Bitza [ 07 Sep 2013, 00:30 ] |
Post subject: | Re: AB Cordia Turbo |
Whats the cam grind and duration? Cams don't make much more power on the 62.......just move the powerband either lower or higher up. |
Author: | sean fiba [ 07 Sep 2013, 12:45 ] |
Post subject: | Re: AB Cordia Turbo |
i have had the cam for that long i cant remember but think the wade camshaft site lists it..? if i can find it i will let you no.. im hoping the cam just brings it on boost a touch sooner.. ??? |
Author: | Bitza [ 12 Sep 2013, 15:16 ] |
Post subject: | Re: AB Cordia Turbo |
I would put them on.......makes the cordia look so much nicer........do you have the front bar aswell? Might also be time for a fuel cut defender........that way you can up the boost a little. |
Author: | sean fiba [ 12 Sep 2013, 15:30 ] |
Post subject: | Re: AB Cordia Turbo |
the front bar i have is not the best but might have ago at saving it.. i didnt think you need a F.C.D with cordias.. :/ how do they work and what are they worth..? |
Author: | Bitza [ 12 Sep 2013, 15:38 ] |
Post subject: | Re: AB Cordia Turbo |
I can repair your front bar.......have done this for many members........once cordia's hit 14psi the fuel cut is activated.......jaycar kit KC5439 "clips" the voltage to the map sensor at 3.8 - 4.2 volts, that way the ECU will never see the full 5 volt activating the fuel cut, which is not a fuel cut but ignition. They are 19.95 plus postage and can only be purchased over the internet. |
Author: | sean fiba [ 12 Sep 2013, 15:41 ] |
Post subject: | Re: AB Cordia Turbo |
hmm ok good to know jaycar do one.. as for my front bar its the one in the first pics (not stock) has had the bottem half cut off and no spots for signal lights.. |
Author: | slythr [ 13 Sep 2013, 21:45 ] |
Post subject: | Re: AB Cordia Turbo |
If you'd like to sell the kit let me know |
Author: | sean fiba [ 24 Sep 2013, 20:29 ] |
Post subject: | Re: AB Cordia Turbo |
oh yea i still need a fan too. dohh.! |
Author: | Bitza [ 24 Sep 2013, 21:16 ] |
Post subject: | Re: AB Cordia Turbo |
Got one spare. |
Author: | sean fiba [ 25 Sep 2013, 01:04 ] |
Post subject: | Re: AB Cordia Turbo |
my mate came around b4 with his ford tx3 fan and i put that on and the old bar with sum motorbike indercators lol and tok her for a drive she goes great..! it runs 8psi and gets there a bit after 3200rpm not bad i think oh and put in new reverse lights and they are stuck on so i unpluged the wire on the gear box now i have 5th gear |
Author: | sean fiba [ 02 Oct 2013, 14:20 ] |
Post subject: | Re: AB Cordia Turbo |
got the Trust muffler all fitted up and it sounds sweet |
Author: | d_nikiforides [ 02 Oct 2013, 21:00 ] |
Post subject: | Re: AB Cordia Turbo |
Looking good buddy |
Author: | sean fiba [ 05 Oct 2013, 15:44 ] |
Post subject: | Re: AB Cordia Turbo |
cheers. i got a front bar today in good nik for $10 just need the mounts and a respray.. once i find the "airdam" or what ever its called. i will start putting it back to original and loose the crapy bar thats on there now... |
Author: | d_nikiforides [ 05 Oct 2013, 23:55 ] |
Post subject: | Re: AB Cordia Turbo |
haha sweet... yeah good man. Take it back to stock front bar |
Author: | sean fiba [ 15 Nov 2013, 18:01 ] |
Post subject: | Re: AB Cordia Turbo |
found these today for $75 need work but all should be fixable.. |
Author: | Bitza [ 15 Nov 2013, 18:33 ] |
Post subject: | Re: AB Cordia Turbo |
Easily fixed! Where did you find them? |
Author: | sean fiba [ 15 Nov 2013, 18:39 ] |
Post subject: | Re: AB Cordia Turbo |
city dismantlers of all places..! i was only there looking for nissan bits for a mate and seen they have 3 cordias and 1 and a half starion wrecks out back... few good bits there still..! |
Author: | Bitza [ 15 Nov 2013, 18:41 ] |
Post subject: | Re: AB Cordia Turbo |
Nice............but their prices are too high............well worth a look. |
Page 2 of 5 | All times are UTC + 10 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |