It is currently 28 Mar 2024, 22:52

All times are UTC + 10 hours [ DST ]




Post new topic Reply to topic  [ 113 posts ]  Go to page Previous  1, 2, 3, 4, 5, 6  Next
Author Message
 Post subject: Re: New AB GSR Project
PostPosted: 05 Jul 2014, 19:17 
Offline
This forum is my life
This forum is my life
User avatar

Joined: 10 Jun 2006, 00:35
Posts: 3644
Location: Adelaide South Australia
Gender: Male
Your car: DOHC 2.3 VR4 85 AB GSR
Immaculate Stock 86 AC GSR
The bay looks great Mike, how does the firewall look under the brake master and the clutch slave?.... nearly all cordia's are rusted in these areas.

Love your work....:)


Top
 Profile  
Reply with quote  
 Post subject: Re: New AB GSR Project
PostPosted: 07 Jul 2014, 23:58 
Offline
Cordia Guru
Cordia Guru
User avatar

Joined: 06 Jan 2011, 15:32
Posts: 471
Location: Melbourne
Gender: Male
Your car: 1985 AB GSL-R
1988 Starion GSR-VR
It was a surprise how well the paint came up underneath the layers of dirt, still a nice shine even. Little to no marks that I can criticise aside from the RHS strut tower where someone has started engraving the VIN only to scratch it out which will be somewhat covered once the strut brace is on. Not before being rust treated of course.

From what I can see of the firewall rust, you could say it appears to look like the 'standard' expected amount, hopefully no worse. I'm making a start on that area tomorrow morning so expect some before & afters.

Still using your thread for my get up & go, nothing left untouched!


Top
 Profile  
Reply with quote  
 Post subject: Re: New AB GSR Project
PostPosted: 08 Jul 2014, 22:02 
Offline
Member
Member

Joined: 13 Jun 2014, 22:18
Posts: 15
Gender: Male
Your car: Vr4 ab fwd cordia
4g63 ac awd cordia
Good to see your still having a go at getting her back on the road it easy to loose interest with big rebuilds like this. It's looking good mate that engine bay looks mint well done


Top
 Profile  
Reply with quote  
 Post subject: Re: New AB GSR Project
PostPosted: 10 Jul 2014, 23:15 
Offline
Cordia Guru
Cordia Guru
User avatar

Joined: 06 Jan 2011, 15:32
Posts: 471
Location: Melbourne
Gender: Male
Your car: 1985 AB GSL-R
1988 Starion GSR-VR
Thanks for the words mate. Yeah that's it, like I said before I haven't made much progress on it since early this year it's only now I've kick started again & got things going. I've made it my main interest now so no excuses.


Top
 Profile  
Reply with quote  
 Post subject: Re: New AB GSR Project
PostPosted: 10 Jul 2014, 23:53 
Offline
Cordia Guru
Cordia Guru
User avatar

Joined: 06 Jan 2011, 15:32
Posts: 471
Location: Melbourne
Gender: Male
Your car: 1985 AB GSL-R
1988 Starion GSR-VR
The weather has delayed me further this week so little has been done. A few updates worth mentioning though - I scored a SuperPro front bush kit & Gates accessory belts while on sale for a good cheap price from an eBayer I usually buy with, so that order should be picked up tomorrow then the sway bar can be refitted & the belts can literally hang around until a later date.

I'll also be dropping the radiator off on Monday morning to be reconditioned. Once that's done I can mount the refurbed fans back & put yet another completed part away AND out of sight.

Swaybar sanded, cleaned & ready for paint:

Image

Stoneguard followed by satin black top coat:
(old bushes came in handy for something!)

Image

Bush retaining brackets sanded, cleaned, etch primed & hit with some gloss black. Nuts & bolts also wire brushed & degreased:

Image

Fan housing in the process of being sanded with some 80 grit:

Image

Etch primed awaiting satin black top coat as well as the mounting brackets:

Image

One engine mount now cleaned up & painted:

Image


Top
 Profile  
Reply with quote  
 Post subject: Re: New AB GSR Project
PostPosted: 11 Jul 2014, 09:03 
Offline
This forum is my life
This forum is my life
User avatar

Joined: 10 Jun 2006, 00:35
Posts: 3644
Location: Adelaide South Australia
Gender: Male
Your car: DOHC 2.3 VR4 85 AB GSR
Immaculate Stock 86 AC GSR
This is going to look as clean as mine!

Keep up the good work Mike.


Top
 Profile  
Reply with quote  
 Post subject: Re: New AB GSR Project
PostPosted: 15 Jul 2014, 18:54 
Offline
Member
Member

Joined: 13 Jun 2014, 22:18
Posts: 15
Gender: Male
Your car: Vr4 ab fwd cordia
4g63 ac awd cordia
So much effort going into this mate good job


Top
 Profile  
Reply with quote  
 Post subject: Re: New AB GSR Project
PostPosted: 15 Jul 2014, 19:50 
Offline
Superuser
Superuser

Joined: 23 Feb 2008, 00:37
Posts: 112
Your car: 1985 Mistubishi Cordia AB GSR
1986 Mistubishi Cordia AC GSR
1997 Mazda Rx7
1980 Mazda B1800
1984 Mazda B2000
could you be kind enough to share the gates accessory belts part numbers?


Top
 Profile  
Reply with quote  
 Post subject: Re: New AB GSR Project
PostPosted: 23 Jul 2014, 17:07 
Offline
Cordia Guru
Cordia Guru
User avatar

Joined: 06 Jan 2011, 15:32
Posts: 471
Location: Melbourne
Gender: Male
Your car: 1985 AB GSL-R
1988 Starion GSR-VR
Appreciate the comments guys!

Just another minor update to show things are still moving along.

Fan housings complete in satin black, I was quite happy with how these turned out. I still need to drop the rad off to be reco'd so I can piece them back together & back into the engine bay to create more clean parts space on the parcel shelf.

Image

Image

Booster getting a clean up

Image

Complete in flat black:

Image

No before shots of the airbox but here it is 99% complete, clamps still need painting.

Image

Image

The firewall rust:

Image

Cleaned up with 80 grit & rust converter applied, however not 100% yet. The steering rack will come out next so I get full access to the rest of it underneath.

Image

So there is where I am at for the moment. I'm planning to have the rack out over the weekend so I can lay some paint down to the firewall & subframe then fit the booster back & order new brake & clutch masters. I've also noticed that there is no listings whatsoever for the steering rack bushes, I've yet to see their condition but the rack has been rebuilt/replaced before sometime in it's life as there is a Pedders sticker on it so they may be okay yet. However I'll be needing another boot for the uni joint if I can source one.

I haven't been able to refit the front swaybar either as there was 'apparently' a manufacturing delay with 2 of the bush kits that I had ordered as a part of the full front kit, so maybe by the weeks end they'll be ready after the almost 2 week wait & falsely advertised as being available. I'm starting to run out of room inside the car to store parts so I'll get some space back once the rad is done & swaybar refitted!

slythr, here are the part #'s for the Gates accessory belts:

Alt & WP 13A1015
A/C 13A1065
P/S 13A0660


Last edited by 0-PSI on 24 Jul 2014, 01:47, edited 2 times in total.

Top
 Profile  
Reply with quote  
 Post subject: Re: New AB GSR Project
PostPosted: 23 Jul 2014, 17:16 
Offline
This forum is my life
This forum is my life
User avatar

Joined: 10 Jun 2006, 00:35
Posts: 3644
Location: Adelaide South Australia
Gender: Male
Your car: DOHC 2.3 VR4 85 AB GSR
Immaculate Stock 86 AC GSR
Nice work Mike, the uni rubbers are difficult to install, I found no listing for the AC when I did it, for a quick and dirty repair on the steering uni joint, just cut down a rack end boot.......worked for me. :)


Top
 Profile  
Reply with quote  
 Post subject: Re: New AB GSR Project
PostPosted: 23 Jul 2014, 17:27 
Offline
Cordia Guru
Cordia Guru
User avatar

Joined: 06 Jan 2011, 15:32
Posts: 471
Location: Melbourne
Gender: Male
Your car: 1985 AB GSL-R
1988 Starion GSR-VR
Perfect, thanks Andrew. I'll pinch a boot from the GSL :D


Top
 Profile  
Reply with quote  
 Post subject: Re: New AB GSR Project
PostPosted: 24 Jul 2014, 01:27 
Offline
Superuser
Superuser

Joined: 23 Feb 2008, 00:37
Posts: 112
Your car: 1985 Mistubishi Cordia AB GSR
1986 Mistubishi Cordia AC GSR
1997 Mazda Rx7
1980 Mazda B1800
1984 Mazda B2000
Cheers mate


Top
 Profile  
Reply with quote  
 Post subject: Re: New AB GSR Project
PostPosted: 06 Aug 2014, 12:07 
Offline
Superuser
Superuser

Joined: 23 Feb 2008, 00:37
Posts: 112
Your car: 1985 Mistubishi Cordia AB GSR
1986 Mistubishi Cordia AC GSR
1997 Mazda Rx7
1980 Mazda B1800
1984 Mazda B2000
I got my belts in, and 99% sure the ALT/WP is wrong. Called gates Aus. and they gave me 2 part numbers for it, 13A1015 and 4PK975, pretty sure it's the latter :(


Top
 Profile  
Reply with quote  
 Post subject: Re: New AB GSR Project
PostPosted: 08 Aug 2014, 16:12 
Offline
Cordia Guru
Cordia Guru
User avatar

Joined: 06 Jan 2011, 15:32
Posts: 471
Location: Melbourne
Gender: Male
Your car: 1985 AB GSL-R
1988 Starion GSR-VR
slythr wrote:
I got my belts in, and 99% sure the ALT/WP is wrong. Called gates Aus. and they gave me 2 part numbers for it, 13A1015 and 4PK975, pretty sure it's the latter :(


Cheers for the heads up. If it is 100% wrong I'll be taking mine back to be swapped for the other then.


Top
 Profile  
Reply with quote  
 Post subject: Re: New AB GSR Project
PostPosted: 08 Aug 2014, 16:14 
Offline
Cordia Guru
Cordia Guru
User avatar

Joined: 06 Jan 2011, 15:32
Posts: 471
Location: Melbourne
Gender: Male
Your car: 1985 AB GSL-R
1988 Starion GSR-VR
Small update. Picked up the now repaired radiator at the start of the week from Campbellfield Radiator Service.

New inlet/outlets were fitted & rad cleaned out, it was 30% blocked.

Image

Refurbished fans dummy fitted:

Image

Finally received the SuperPro front bush kit & accessory belts, bushes included were:

- Control Arm Lower-Inner Bushing

- Strut Bar To Chassis Mount Kit

- Sway Bar Link To Chassis Bushing

- Sway Bar To Strut Arm D Bushing

- Sway Bar Mount To Chassis Bushing

Image

New brake master came in this morning too. Also ordered a new clutch master which I will see next week:

Image

More suspension parts restored - LCA (the 2nd is still being painted) & caster arms etch primed, stone guarded & finished in gloss black as well as new bushes fitted to LCA's & swaybar:

Image

Image

Next up over the days ahead I'll be cleaning & painting the TN Magna front brake upgrade ready to go on upon fitting the suspension components back.


Top
 Profile  
Reply with quote  
 Post subject: Re: New AB GSR Project
PostPosted: 08 Aug 2014, 16:38 
Offline
This forum is my life
This forum is my life
User avatar

Joined: 10 Jun 2006, 00:35
Posts: 3644
Location: Adelaide South Australia
Gender: Male
Your car: DOHC 2.3 VR4 85 AB GSR
Immaculate Stock 86 AC GSR
Loving this thread Mike, feels like Dajaveu.........will look clean once finished.

Might have to meet up with my AC and your AB for a look and greet. :)


Top
 Profile  
Reply with quote  
 Post subject: Re: New AB GSR Project
PostPosted: 10 Aug 2014, 13:29 
Offline
Cordia Guru
Cordia Guru
User avatar

Joined: 06 Jan 2011, 15:32
Posts: 471
Location: Melbourne
Gender: Male
Your car: 1985 AB GSL-R
1988 Starion GSR-VR
Could be a plan for the new year Andrew? :)

And thanks mate appreciate the feedback, glad it's still gets followed!!


Top
 Profile  
Reply with quote  
 Post subject: Re: New AB GSR Project
PostPosted: 10 Aug 2014, 17:13 
Offline
This forum is my life
This forum is my life
User avatar

Joined: 10 Jun 2006, 00:35
Posts: 3644
Location: Adelaide South Australia
Gender: Male
Your car: DOHC 2.3 VR4 85 AB GSR
Immaculate Stock 86 AC GSR
Oh yeah Mike............my shed parts are increasing every weekend. :)


Top
 Profile  
Reply with quote  
 Post subject: Re: New AB GSR Project
PostPosted: 31 Aug 2014, 22:32 
Offline
Cordia Guru
Cordia Guru
User avatar

Joined: 06 Jan 2011, 15:32
Posts: 471
Location: Melbourne
Gender: Male
Your car: 1985 AB GSL-R
1988 Starion GSR-VR
Progress update coming shortly. Suspension/brakes/wheels have been sorted & will be complete this week, pics to come.


Top
 Profile  
Reply with quote  
 Post subject: Re: New AB GSR Project
PostPosted: 31 Aug 2014, 22:41 
Offline
This forum is my life
This forum is my life
User avatar

Joined: 10 Jun 2006, 00:35
Posts: 3644
Location: Adelaide South Australia
Gender: Male
Your car: DOHC 2.3 VR4 85 AB GSR
Immaculate Stock 86 AC GSR
Nice, can't wait..... :D


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 113 posts ]  Go to page Previous  1, 2, 3, 4, 5, 6  Next

All times are UTC + 10 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 27 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron



Connect with Cordia Power on Facebook. Cordia Power 2000-2020. Cordia Forum powered by phpBB.