Cordia Forum
https://www.cordiapower.com/forum/

Target 1000hp Cordia
https://www.cordiapower.com/forum/viewtopic.php?f=12&t=17760
Page 3 of 3

Author:  biglady112 [ 10 Mar 2015, 13:14 ]
Post subject:  Re: Target 1000hp Cordia

Behold, my piece of shit.

Image

Image

Author:  d_nikiforides [ 10 Mar 2015, 14:02 ]
Post subject:  Re: Target 1000hp Cordia

Definatly a quick paintjob, but none the less will be fine for a track pig.

Random note, was this a digital dash model? Are you using it? If not PM me? I have $ for it, but need shipped to AUS :P

Author:  biglady112 [ 10 Mar 2015, 14:11 ]
Post subject:  Re: Target 1000hp Cordia

It was not a digital tach in this thing. I tossed it.

Author:  4cylturb [ 10 Mar 2015, 16:53 ]
Post subject:  Re: Target 1000hp Cordia

biglady112 wrote:
Behold, my piece of shit.


Thanks, i got a good laugh out of that. Cheers for posting your pics.

Author:  biglady112 [ 17 Mar 2015, 06:21 ]
Post subject:  Re: Target 1000hp Cordia

I give you the T3 10cm 14b we will be starting out this year with. I am going tobgive this tutbo one more chance to go fast.

URL=http://smg.photobucket.com/user/biglady112/media/cordia/WP_20150315_12_57_19_Pro_zpsm2jzki7b.jpg.html]Image[/ :P URL]

Author:  Tomica93 [ 24 Mar 2015, 18:30 ]
Post subject:  Re: Target 1000hp Cordia

With this turbo and mani, max 350hp

Author:  biglady112 [ 25 Mar 2015, 09:19 ]
Post subject:  Re: Target 1000hp Cordia

Here is the other setup after I let my friend have one more shot at the small turbo.

Image

Image

Author:  biglady112 [ 01 Apr 2015, 13:08 ]
Post subject:  Re: Target 1000hp Cordia

Got the clutch and flywheel installed. It is an ACT 3200 with an XTD flywheel and unsprung six puck disc. I have done some other small things as well while saving up. I finished the new j-pipe for the 14b, got the rear floor almost ready for the new fuel tank which should be back from finish welding any day now. I got the ghetto fabulous trunk release made. I also got the new EGT bungs welded on the T3 manifold for the 14b. I got the rear hood pins welded in and have decided to do two more on the front of the hood. As much as I like the way the hood flips forward but, it makes working on the car a pain. With any luck if all my measuring was right I will install the transmission tomorrow and work on making the mount for it.

Image

Author:  biglady112 [ 02 Apr 2015, 15:11 ]
Post subject:  Re: Target 1000hp Cordia

Piping and manifold complete.

Image

Author:  biglady112 [ 20 Apr 2015, 15:30 ]
Post subject:  Re: Target 1000hp Cordia

Not a ton to report as I have been saving money. A few small things here and there. Today I made the transmission mount and finally installed the transmission. I got the axles installed, the suspension height adjusted and the wheels on. The only thing left to fire it now are to install the wiring harness(I plan on doing that this week) and plumb the fuel system. If I get the fuel tank back soon I can have it running very quickly. Inching closer. All the pictures turned out dark today of the transmission and mount. Here is the car sitting back on all four for the final time.

Image

Author:  Convertible Boy [ 24 Apr 2015, 08:57 ]
Post subject:  Re: Target 1000hp Cordia

You have the US front whit the dubble heatlights. I search all many years from that complete frond. Do you know where I can find it?

Author:  biglady112 [ 25 Apr 2015, 11:09 ]
Post subject:  Re: Target 1000hp Cordia

I live in America. All of the cars here are like mine. I bought it this way. This is the only Cordia I have ever seen in person.

Author:  taba [ 29 May 2015, 17:21 ]
Post subject:  Re: Target 1000hp Cordia

WOW LOVING THIS!

Author:  biglady112 [ 18 Jun 2015, 14:40 ]
Post subject:  Re: Target 1000hp Cordia

Very close to firing it up now.

Image

Image

Author:  biglady112 [ 06 Jul 2015, 16:10 ]
Post subject:  Re: Target 1000hp Cordia

Unless anything crazy happens it should run in the next day or two.

Image

Author:  biglady112 [ 07 Jul 2015, 15:40 ]
Post subject:  Re: Target 1000hp Cordia

It runs. I have to repair a broken ground to the ecu, finish taping up the wiring harness and figure out if a plug died or the injector is bad as number three is not firing. I bead blasted the plug and it did not make a difference. It does have spark so I am leaning towards the injector. It is just some old stock 450 I had laying around until I get my new wideband so I can pour methanol in. Thank goodness for individual egt's. Makes it easy to diagnose.

I will get pictures after I clean things up. It still needs a shifter, shifter cables, shifter arms, a radiator setup, camber plates and an alignment and a wideband before I can take it to the dyno. I will have it tuned long before it is ready for the track. Probably not this year but, I can at least have the tune ready to go while I finish the chassis.

Author:  biglady112 [ 08 Jul 2015, 11:51 ]
Post subject:  Re: Target 1000hp Cordia

This is how the car is going to look while I continue the 14b quest for now. I have more to do obviously but, other projects and lack of funding are going to hold the car back for now. Hopefully this fall I will be on the dyno with it. The harness is almost complete. I had an EGT sensor die so I need to replace it, if not another one before I complete the harness. The drivetrain and wiring are pretty much complete though.

Image

Image


Image

Image

Image

Author:  cordiaaaturbo [ 24 Jul 2015, 23:24 ]
Post subject:  Re: Target 1000hp Cordia

well holy shit come back on to the forum first time in a year or so and wam! this is pretty insane!

Page 3 of 3 All times are UTC + 10 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/