Cordia Forum https://www.cordiapower.com/forum/ |
|
Stuff https://www.cordiapower.com/forum/viewtopic.php?f=12&t=17978 |
Page 1 of 3 |
Author: | TRQ-STR [ 29 May 2016, 19:30 ] |
Post subject: | Re: Stuff |
I thought you had no intentions of modifying the AC, this will be interesting! |
Author: | Bitza [ 29 May 2016, 19:44 ] |
Post subject: | Re: Stuff |
I don't Koray............but the rocker gear will help with the "unbearable" tick when hot.........even though I have closed the tappet clearance down. |
Author: | Bitza [ 29 May 2016, 20:30 ] |
Post subject: | Re: Stuff |
TIP: Rather than pay the astronomical price for injector base seals, just use some 10mm oil cooler hose and cut to size.........works perfectly for all MPI systems including VR4. |
Author: | fernandothecarguy [ 30 May 2016, 01:08 ] |
Post subject: | Re: Stuff |
cool i might learn something is the rocker gear of 62? |
Author: | Bitza [ 30 May 2016, 08:18 ] |
Post subject: | Re: Stuff |
No, 4G63. |
Author: | CordiaKaine [ 30 May 2016, 08:40 ] |
Post subject: | Re: Stuff |
Are they the 1.8 litre dohc 4g61 (I think) I went to buy one of those blocks, ripped head off. Massive hole in the piston. So I didn't lol |
Author: | Bitza [ 30 May 2016, 08:48 ] |
Post subject: | Re: Stuff |
HG Galant runs the SOHC 8 valve 2 litre 4G63. |
Author: | S1VART [ 30 May 2016, 10:57 ] |
Post subject: | Re: Stuff |
if you go the 96 to 98 verada lash adjusters there metal , most of the others have plastic on them and break easy there should be a ton of those motors at the wreckers these days too |
Author: | CordiaKaine [ 30 May 2016, 11:27 ] |
Post subject: | Re: Stuff |
Bitza wrote: HG Galant runs the SOHC 8 valve 2 litre 4G63. Ah ok, I must of been looking at the wrong model galant! Thank you for the correction, I'm slowly learning these things |
Author: | CordiaKaine [ 30 May 2016, 11:32 ] |
Post subject: | Re: Stuff |
Are the blocks the same as the dohc 4g63? |
Author: | Bitza [ 30 May 2016, 17:23 ] |
Post subject: | Re: Stuff |
S1VART wrote: if you go the 96 to 98 verada lash adjusters there metal , most of the others have plastic on them and break easy there should be a ton of those motors at the wreckers these days too That's nice to know Travis, the old ones have the piston hanging out of them as the plastic is broken, only one survived.......are the Verada ones still available new?......cost? |
Author: | S1VART [ 31 May 2016, 09:09 ] |
Post subject: | Re: Stuff |
MD377560 but trade price is $40 each , there not to cheap you could buy a KE KF verada for $400 these days |
Author: | Bitza [ 31 May 2016, 17:36 ] |
Post subject: | Re: Stuff |
$40 each!!!!!! How many are in a Verada, is it 12 or 24? |
Author: | S1VART [ 01 Jun 2016, 09:34 ] |
Post subject: | Re: Stuff |
24 in a Verada yes very expensive , and I see so many people change them due to putting the wrong oil in the car , same with the 4g63 aswell |
Author: | S1VART [ 02 Jun 2016, 09:17 ] |
Post subject: | Re: Stuff |
lack of good oil or oil change, otherwise that cleaner works a treat |
Author: | fernandothecarguy [ 02 Jun 2016, 09:22 ] |
Post subject: | Re: Stuff |
nice clean . very clever using oven clean good job rocker gear looks so much like the 62. |
Author: | 0-PSI [ 02 Jun 2016, 11:21 ] |
Post subject: | Re: Stuff |
MD377560 - between $17-$19 from JP pending who you go through to import them. |
Author: | fernandothecarguy [ 02 Jun 2016, 13:18 ] | ||
Post subject: | Re: Stuff | ||
talking about stuff. this ad states is 4g63 but the pic looks like 62. http://www.gumtree.com.au/s-ad/elizabet ... 1114508209
|
Page 1 of 3 | All times are UTC + 10 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |