It is currently 08 May 2024, 22:59

View unanswered posts | View active topics


Board index » Cordia Power Forum » General Discussion

All times are UTC + 10 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 
  Print view Previous topic | Next topic 
Author Message
ezspoolin
 Post subject: AE86 bar on cordias?
PostPosted: 24 Apr 2007, 03:53 
Offline
Forum Regular
Forum Regular

Joined: 22 Feb 2007, 09:33
Posts: 48
has anyone put the levin bumper on the cordia?

it looks like it would fit ok and look pretty good too

_________________
the mean green machine
Top
 Profile  
Reply with quote  
hypo_cordia
 Post subject:
PostPosted: 25 Apr 2007, 18:00 
Offline
Member
Member
User avatar

Joined: 24 Apr 2007, 13:05
Posts: 1
you can always make it fit
Top
 Profile  
Reply with quote  
FRONTN
 Post subject:
PostPosted: 25 Apr 2007, 18:02 
Offline
Super Cordia Guru
Super Cordia Guru
User avatar

Joined: 21 Nov 2003, 10:44
Posts: 704
Location: Hillside, Vic
Gender: Male
Your car: FRONTN
I was thinking the same thing too. It's worth a shot, dimensions looks similar enoough. Their body kits are common too.

_________________
FRONTN-Cordia GSR |Tim|
|VR4 4G63BT|MicroTech LT8S|E7RS 9.8T TD05HR|560cc|Buddyclub P1|White on white||evo 2 brakes|
167fwkw @ 8200rpm 400nm (16psi)

PS: Lol @ spell check, it doesn't even know what a "Cordia" is.
Top
 Profile  
Reply with quote  
ezspoolin
 Post subject:
PostPosted: 28 Apr 2007, 08:56 
Offline
Forum Regular
Forum Regular

Joined: 22 Feb 2007, 09:33
Posts: 48
how do you even take our bumper off?

_________________
the mean green machine
Top
 Profile  
Reply with quote  
FRONTN
 Post subject:
PostPosted: 28 Apr 2007, 16:17 
Offline
Super Cordia Guru
Super Cordia Guru
User avatar

Joined: 21 Nov 2003, 10:44
Posts: 704
Location: Hillside, Vic
Gender: Male
Your car: FRONTN
Which bumper?
Front: should be 2 long bolts with access underneath. careful not to break indicator wiring.
Rear: should be 2 bolts on each side with access inside the boot.

I might make my other cordia looks old skool with a full vertex kit from an AE86.

_________________
FRONTN-Cordia GSR |Tim|
|VR4 4G63BT|MicroTech LT8S|E7RS 9.8T TD05HR|560cc|Buddyclub P1|White on white||evo 2 brakes|
167fwkw @ 8200rpm 400nm (16psi)

PS: Lol @ spell check, it doesn't even know what a "Cordia" is.
Top
 Profile  
Reply with quote  
ezspoolin
 Post subject:
PostPosted: 02 May 2007, 06:28 
Offline
Forum Regular
Forum Regular

Joined: 22 Feb 2007, 09:33
Posts: 48
where are these two bolts at?

i thought there were like ten to twelve

_________________
the mean green machine
Top
 Profile  
Reply with quote  
FRONTN
 Post subject:
PostPosted: 02 May 2007, 22:40 
Offline
Super Cordia Guru
Super Cordia Guru
User avatar

Joined: 21 Nov 2003, 10:44
Posts: 704
Location: Hillside, Vic
Gender: Male
Your car: FRONTN
Like i said you'll need access from the boot..
take off the flooring. you'll find some black bracing/bracket.
2 12mm bolt i think on each side..

_________________
FRONTN-Cordia GSR |Tim|
|VR4 4G63BT|MicroTech LT8S|E7RS 9.8T TD05HR|560cc|Buddyclub P1|White on white||evo 2 brakes|
167fwkw @ 8200rpm 400nm (16psi)

PS: Lol @ spell check, it doesn't even know what a "Cordia" is.
Top
 Profile  
Reply with quote  
ezspoolin
 Post subject:
PostPosted: 03 May 2007, 01:55 
Offline
Forum Regular
Forum Regular

Joined: 22 Feb 2007, 09:33
Posts: 48
no i need to know about the front bar

_________________
the mean green machine
Top
 Profile  
Reply with quote  
ACTGSR
 Post subject:
PostPosted: 07 May 2007, 19:11 
Offline
Cordia Guru
Cordia Guru
User avatar

Joined: 09 Aug 2006, 06:16
Posts: 264
Location: Canberra
front bar is piss easy. lay down under it. you will see 2 12mm bolts. they are quite long... 150mm or so. then behind the number plate there is another, think its a 10mm tho. as said above, careful with indicator wiring.

_________________
White '86 AC GSR
Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 

Board index » Cordia Power Forum » General Discussion

All times are UTC + 10 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 20 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron



Connect with Cordia Power on Facebook. Cordia Power 2000-2020. Cordia Forum powered by phpBB.