Cordia Forum
https://www.cordiapower.com/forum/

gear rack
https://www.cordiapower.com/forum/viewtopic.php?f=3&t=17934
Page 1 of 1

Author:  fernandothecarguy [ 28 Mar 2016, 00:24 ]
Post subject:  gear rack

Hi guys was wondering if this has a name?
If I can get one from any where?
If it can be fixed with urethane anyone had any luck fixing it?
Thanks

Attachments:
2.jpg
2.jpg [ 133.1 KiB | Viewed 18516 times ]
1.jpg
1.jpg [ 215.88 KiB | Viewed 18516 times ]

Author:  Bitza [ 28 Mar 2016, 13:21 ]
Post subject:  Re: gear rack

viewtopic.php?f=4&t=17736

Author:  fernandothecarguy [ 03 Apr 2016, 17:04 ]
Post subject:  Re: gear rack

Thanks Bitza.
Didn't get your message till late.
I had left over urethane is the rubber glue used on windscreens ,quarter panel glass
Is also used to glue some car panels like roofs of some cars mig is getting to be old school.
Anyway had some left from doing a job once its open the damn glue dries very fast normally
Put screw on the end in couple days it just dries.
I glue the 2 ends that was torn off I applied very thin layer .
To both ends the thing about urethane is you don't need huge amounts
The original rubber was till there usually sticks well to the left over rubber glue of windscreens.
Having said this im not sure if its going to be strong enough as the original glue is as small as 5cent coin

Attachments:
2016-04-03 15.31.13.jpg
2016-04-03 15.31.13.jpg [ 171.92 KiB | Viewed 18439 times ]
2016-04-03 15.52.38.jpg
2016-04-03 15.52.38.jpg [ 207.74 KiB | Viewed 18439 times ]

Author:  fernandothecarguy [ 13 Apr 2016, 15:24 ]
Post subject:  Re: gear rack

Managed to put my repaired shifter in and my new console in.
I also had a custom made dash done.

Attachments:
2016-04-13 13.54.18.jpg
2016-04-13 13.54.18.jpg [ 163.61 KiB | Viewed 18383 times ]
2016-04-13 13.53.50.jpg
2016-04-13 13.53.50.jpg [ 163.59 KiB | Viewed 18383 times ]

Author:  Bitza [ 13 Apr 2016, 15:31 ]
Post subject:  Re: gear rack

The dash looks good, I did the same thing but molded the boost gauge into the A pillar.

Author:  fernandothecarguy [ 13 Apr 2016, 16:42 ]
Post subject:  Re: gear rack

i have seen people screw them in to pillar

Author:  Bitza [ 13 Apr 2016, 16:47 ]
Post subject:  Re: gear rack

Image

Author:  fernandothecarguy [ 28 Nov 2016, 19:04 ]
Post subject:  Re: gear rack

update on gear rack.
after few days driving the glue gaveway gear stick was been held by exhaust.
my son suggested why don't i put a couple screws holding both brackets .
so took a few pics .
now is perfect,left the rubber on drilled brackets put bolt with nut and also
used loctite on nuts.
also took pic of my son helping out

Attachments:
20161122_203946.jpg
20161122_203946.jpg [ 101.88 KiB | Viewed 17820 times ]
20161122_202514.jpg
20161122_202514.jpg [ 218.79 KiB | Viewed 17820 times ]
20161122_204019.jpg
20161122_204019.jpg [ 167.69 KiB | Viewed 17820 times ]

Author:  Bitza [ 28 Nov 2016, 19:48 ]
Post subject:  Re: gear rack

That's not a cordia shifter but colt.

Author:  fernandothecarguy [ 29 Nov 2016, 19:07 ]
Post subject:  Re: gear rack

gear change is easy and i get no noise when changing gears.
im very impressed with it.
should last long time :D
had everyone from my work coming around looking around my car.
some said haven't seen a cordia for years .
at least 20 people were impressed .
some asked me if i was selling .
got me 2 new tyres and the mechanic that changed tyres said, he
loves my car but hates Manuel steering :lol: .
he also asked if i want to sell.

Author:  S1VART [ 30 Nov 2016, 15:53 ]
Post subject:  Re: gear rack

thats awesome

Page 1 of 1 All times are UTC + 10 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/