| Cordia Forum https://www.cordiapower.com/forum/ |
|
| Bushing help to everyone https://www.cordiapower.com/forum/viewtopic.php?f=4&t=17920 |
Page 1 of 1 |
| Author: | Wexx [ 13 Mar 2016, 03:59 ] |
| Post subject: | Bushing help to everyone |
I thought I would post some info on bushings that I had to work through. MOOG part #K9167/BECK/ARNLEY 1011774/ACDELCO 45G9039 lower control arm bushings are the correct parts that will work, but since rockauto did not show it for the Cordia, I had to look elsewhere and a 1981 Toyota Corolla bushing is the same thing. Now, for the rear motor mount I had to do something drastic. I ordered two front mounts and cut one open to retrieve the bushing, and then cut the old bushing out of the rear mount and pressed in the new one (they are both the same diameter PN#DEA A6682). There is an issue doing this, and the front mount is about 3/16 narrower and has a larger diameter bolt, so you will need to enlarge (drill out) the rear steel mount to the engine to I think M12x80/90mm bolt. Rob http://www.rockauto.com/en/catalog/toyo ... shing,7532 http://www.rockauto.com/en/catalog/mits ... mount,5552 |
|
| Page 1 of 1 | All times are UTC + 10 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|