It is currently 22 Sep 2021, 16:21

All times are UTC + 10 hours [ DST ]




Post new topic Reply to topic  [ 1 post ] 
Author Message
 Post subject: Bushing help to everyone
PostPosted: 13 Mar 2016, 03:59 
Offline
Forum Regular
Forum Regular

Joined: 08 May 2015, 07:22
Posts: 80
Gender: Male
I thought I would post some info on bushings that I had to work through.

MOOG part #K9167/BECK/ARNLEY 1011774/ACDELCO 45G9039 lower control arm bushings are the correct parts that will work, but since rockauto did not show it for the Cordia, I had to look elsewhere and a 1981 Toyota Corolla bushing is the same thing.
Now, for the rear motor mount I had to do something drastic. I ordered two front mounts and cut one open to retrieve the bushing, and then cut the old bushing out of the rear mount and pressed in the new one (they are both the same diameter PN#DEA A6682). There is an issue doing this, and the front mount is about 3/16 narrower and has a larger diameter bolt, so you will need to enlarge (drill out) the rear steel mount to the engine to I think M12x80/90mm bolt.

Rob

http://www.rockauto.com/en/catalog/toyo ... shing,7532
http://www.rockauto.com/en/catalog/mits ... mount,5552


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC + 10 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron



Connect with Cordia Power on Facebook. Cordia Power 2000-2020. Cordia Forum powered by phpBB.