Cordia Forum
https://www.cordiapower.com/forum/

Clutch replacement on 4g63t cordia
https://www.cordiapower.com/forum/viewtopic.php?f=4&t=21282
Page 1 of 1

Author:  blucordia85+ [ 12 Jan 2021, 19:40 ]
Post subject:  Clutch replacement on 4g63t cordia

I need to replace my clutch and just wondering if the 4g62 clutch is the same as the 4g63?

Author:  blucordia85+ [ 13 Jan 2021, 19:04 ]
Post subject:  Re: Clutch replacement on 4g63t cordia

I'm new to clutches and not sure what one to buy, was thinking of trying the Blusteele brand off eBay but not sure which one to order? 4g63 or 4g62 as this is the first time I've had to change the clutch on the new 4g63 setup.

Author:  S1VART [ 28 Jan 2021, 21:24 ]
Post subject:  Re: Clutch replacement on 4g63t cordia

it will depend on the flywheel used, to suite the clutch, might have to remove and measure before

Ive always run Excedy sports tuff ( pink ) but it depends on the power your chasing with a clutch too, the sports tuff was slipping on me at about 230wkw but in a AWD on 25psi, but I just kept pushing it as it never failed

Author:  blucordia85+ [ 18 Feb 2021, 21:04 ]
Post subject:  Re: Clutch replacement on 4g63t cordia

Well I think a standard heavy duty clutch doesn't work, already broke the new one LoL Think I'll try the clutch you talked about, the car is making 187kw atw Was thinking bout a cushioned button clutch but not too sure what they are like. I'm going to get the flywheel machined also, the guy I got the engine off had a swirl pattern machined on the flywheel and I think it's too aggressive on the clutch plate. The clutch I pulled out broke the retaining plate for the springs and I'm sure the new one I put in will be the same when I pull it out. Another weekend pulling the gearbox out, getting pretty good at it LoL

Page 1 of 1 All times are UTC + 10 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/