Hey guys,
Havent been on here for a while as iv'e been very busy with Djing all over the place and work.
Basically i'm selling the complete final turbo set up that was on Joe's VR423Q vr4 cordia many years ago since purchasing it the turbo has not been used at all and has just been wrapped up and stored away in my garage.
It was quite a while when I purchased this turbo ( was when I first had the maroon cordia so your looking at 4 years +) so the specs are just off the top of my head and stretching the memory.
It is a Custom made Mitsubishi turbo which from my understanding Joe purchased from a Starion owner who pushed out over 200kws easily
It is still in excellent condition with minimal shaft play.
It has a TD06 comp cover
Ported inlet
20G Wheel
TCO6 Rear exhaust housing
Has custom lines including a braided line with fittings.
Is mounted to a ported manifold including head shield, was told it was E3 but not sure.
This is a direct bolt in for a VR4 cordia you will only have to slightly re-position your radiator
for the turbo to fit.
I will also be including a custom ceramic coated dump pipe with front pipe including oxygen sensor which is a direct fit for the turbo.
Piror to selling the turbo to me, Joe made 170+ kws at the wheels on approximately 12 psi.
This was with a standard motor, standard dump pipe as well as the car being untuned. Certainly with the dump pipe and a proper tune you will be looking at healthy larger numbers.
Pics can be found by clicking on the following links:
http://img132.imageshack.us/i/p7010799.jpg/http://img26.imageshack.us/i/p7010800.jpg/http://img10.imageshack.us/i/p7010802.jpg/http://img843.imageshack.us/i/p7010801.jpg/Price: $300 I am located in Sydney and can deliver locally in the Sydney area, can ship interstate if buyer pays for shipping which I can probably source for cheap.
It's preferable that you contact me by calling me on 0422 418 309 but you can still PM me PLEASE STRICTLY NO TIME WASTERS!
Thanks guys.
Login
FAQ
Search
