I am about to dive into a pretty nasty build and just bought this car two weeks ago. The previous owner removed all the interior and gave it to me. I tossed most of it as I have noticed most of you are in Australia and New Zealand. I still have the dash and all the parts attached to that as well as the front seats, upper rear seats and seat belts.

All the wiring harness is still intact. As well as the engine, transmission, shifter linkage and all of those parts. I am going with a 4G63 that I pulled out of my rat rod and have already picked up a F5M33 transmission for this build. If there are parts you can think of please let me know. It needs to be worth both of our whiles though for me to ship something to someone in the land of OZ.

Please let me know if I can help as I will be taking this thing apart starting this weekend. All of the glass is coming out in favor of lexan as well. Please speak up if you are stateside and need something.

Steven
720-483-9375

_________________
1985 Mitsubishi Cordia
Build in progress

Good luck with the build, a F5M33 gearbox is not a direct fit into the cordia, you will need to gusset the drivers side chassis rail in order to fit it.

You will encounter problems with the rear subframe, which results in some of the gearbox being ground back in order for it to clear.

You will also need to change the gearbox mount to something similar like Nimus as the stock one won't fit either.

I am aware of what is going to have to happen. Fpr what I have in store the DSM tranny iagoing to be my choice. I have built 5 colts/mirages and have one sitting in front of my house that made 864hp on the old setup and looking for 1000hp on the new setup. I plan to shoot for over 1000hp as well with the cordia. It is getting my setup from my truck and I made 800hp 556tq through an automatic transmission with that vehicle.

_________________
1985 Mitsubishi Cordia
Build in progress

Excuse me for posting, no more replies on my behalf.

Lol Andrew, your advice does not appear to be needed here.

Biglady112, with the way the Australian dollar is sitting at the moment you'll be hard pressed for anything to be worth the expense of shipping from the US of A. Not to mention half the shit is on the wrong side of the car over there. Wouldn't mind seeing some photos of this 864hp mrbishi you speak of though.

That is why I listed it as a US ad. It would have to be super important or rare for it to be worth someone's while down there. We have a hope to be 8 second talon here(already went 9.3), the hope to be soon 1000hp mirage, my now no longer 800hp 4g63 rat rod. And a few other nasty cars. We have also gone 218mph in a talon at the salt flats.

http://4g61t.org/forum/viewtopic.php?f=3&t=38938

_________________
1985 Mitsubishi Cordia
Build in progress

Cool, thanks man. Love the position of the exhaust on that mirage.