Cordia Forum
https://www.cordiapower.com/forum/

WTB: VIN number and chasis plates 1.6 Cordia Turbo
https://www.cordiapower.com/forum/viewtopic.php?f=6&t=17758
Page 1 of 1

Author:  turbo21 [ 12 Feb 2015, 00:08 ]
Post subject:  WTB: VIN number and chasis plates 1.6 Cordia Turbo

Wanted: Yes, I know it's a little strange, but a 1985 (I suppose) Cordia turbo from Switzerland entered at a junkyard here in my country, Spain, and I bought it. The problem is that here is not possible to sell a whole car from a junkyard if has given a final deregistration... But the car was so good, so I insisted and they accepted to sell me the whole car without chassis number and the two plates from the engine. To be able to register the car again as an historic car (because has more than 25 years) I need another VIN number from a Cordia Turbo, it doesn't matter colour, version, where was made or even if is listed as destroyed in it's country. It just needs to be a 1.6 turbo model.

This is the car... I can't belive they wanted to destroy this car only because the turbo seems to be broken (but I can understand it, here is almost impossible to get parts).

Image


And this is the engine problem (as I said, I think is due to the turbo)


Image


And here images from the junkyard where it was. Just entered there, but was not decontaminated or anything, I bought it when it entered there.

Image
Image


I'm from Spain, so I'll pay the shipping because I don't think anybody will help me here. If you can help me, please, contact me, I really want to be able to drive this car!

Author:  TRQ-STR [ 26 Feb 2015, 10:12 ]
Post subject:  Re: WTB: VIN number and chasis plates 1.6 Cordia Turbo

Wow this looks to be in very good condition. I hope someone on here can help you out.

Author:  Bitza [ 26 Feb 2015, 12:40 ]
Post subject:  Re: WTB: VIN number and chasis plates 1.6 Cordia Turbo

You will be hard pressed to get plates for a 1.6 carby Turbo, most of ours were the 1.8 ECI injected.

Good luck find ones though.

Author:  turbo21 [ 07 Mar 2015, 00:27 ]
Post subject:  Re: WTB: VIN number and chasis plates 1.6 Cordia Turbo

Thank you very much, I know it's something quite difficult but I still want to get a chassis code from a 1.6 turbo model... If I can't find anything in this time, I still can use another code and make an engine change homologation... but if it's possible, I want to avoid that. A real Cordia 1.6 turbo needs to have a real 1.6 turbo code, because I want to have the most "original" condition as possible.

I dissassembled the turbo and that seems to be the problem, so now I'm trying to rebuild it.


Thank you again!

Author:  d_nikiforides [ 07 Mar 2015, 10:23 ]
Post subject:  Re: WTB: VIN number and chasis plates 1.6 Cordia Turbo

Beautiful car mate!

Good luck finding a plate. :)

Page 1 of 1 All times are UTC + 10 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/