Cordia Forum
https://www.cordiapower.com/forum/

Clearing out some old parts
https://www.cordiapower.com/forum/viewtopic.php?f=6&t=21276		 Page 1 of 1
Author:  4cylturb [ 22 Feb 2020, 21:57 ]
Post subject:  Clearing out some old parts
Just sold my cordia and will list all the leftover parts i have. Will update as i find them. Won't bother with photos, if your interested, PM me and i'll send photos through from my phone.

* SACHS rear shock absorbers - BNIB. Never got around to installing them. $100 ono for both. Same as the ones listed here

https://www.ebay.com.au/itm/SACHS-REAR- ... b59bd5e9d1

* For the VR4 guys. 86mm MLS Cometic head gasket - Brand new. $100. Listed elsewhere.

* Clutch master cylinder rebuild kit MB012161 - Brand new in packet. $10. Can also include a clutch master cylinder disassembled, bore in good shape, will suit a reco.

* VR4 Galant HH twin pot rotors. Machined and used for about 100kms until my DBA's arrived. $50

* Set of magnecor ingnition leads for VR4 2L with coil pack mounted inside inlet manifold. Well used, over 40k kms. Bought a new set to diagnose a misfire but turned out to be ignitor. Nothing wrong with the leads. $50

* Complete used fuse box. Took it off my donor car just in case. Never needed. Free if you pay postage.

* 4G62 rear main gasket, oil seal, oil separator, and housing. x2 of everything except the housing. $10 the lot

* Fuel tank hanger and external pump bracket. Free, just pay postage.

* Every timing cog and pulley for the 4G62. Free, just pay postage.

* I have the kit for the gauge cluster to make the dials white. Still has instructions. $20

* I have an absolute heap of little clips, screws, bolts and plastic thingys etc to suit the cordia. If your after something specific, hit me up and i might have it.

The VR4 stuff i will be listing elsewhere. Anything specific to the cordia i will hang on to for a while, i know this forum doesn't get visited much. But it will find it's way to the tip eventually if there is no interest.

I am located in Sydney. Negotiable on prices. Happy to post.
Page 1 of 1 All times are UTC + 10 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/