I Got My VR4 Cordia STARTED !!!!
After Many Hours Of Wire Tracing I Have Descovered the Following:-
CORDIA Big VR4 Auto Trans Harness
Round Conector
Black / Yelow ________________ Black / Yellow
Black /White__________________Black /White
|
Black /White__________________Black / Red (Control Relay Pin 10)
Black _________________ Red / Black / Blue Stripe(ECU 103)
Also the Black/Yelow Wires that Did go to the Auto Trans must be shorted
Also make Sure pin 104 if the ECU is Grounded
Now I can tidy up the mess I made and make Every thing look neat
[/code]