It is currently 28 Mar 2024, 19:24

All times are UTC + 10 hours [ DST ]




Post new topic Reply to topic  [ 12 posts ] 
Author Message
 Post subject: Paint guns and parts
PostPosted: 23 Nov 2014, 17:35 
Offline
This forum is my life
This forum is my life
User avatar

Joined: 10 Jun 2006, 00:35
Posts: 3644
Location: Adelaide South Australia
Gender: Male
Your car: DOHC 2.3 VR4 85 AB GSR
Immaculate Stock 86 AC GSR
Hi guys,
Just thought I would share "what" I'm up to.........purchased a really cheap gravity feed spray gun (under $20) from Supercheap auto........sick of the suction guns as you can't really spray roofs and the last little bit of the paint remains in the pot........so.......I'll give it a go.........as long as it sprays!

Removed the air fitting and replaced with a RYCO fitting for my airline. Here is what the cheap gun looks like.

Image

Even though this gun is super cheap it actually sprayed quite well, I put 2 coats of blue on my spare grill, just to see how it sprayed.

Image

Image

Turned out pretty good, mind you I didn't rub the grille down before hand. There is no clear coat on the grille.

I have now ordered a scorpion 1.3 gravity feed gun just for clear coat.......should see it this week.

This one is for Grant, your front spoiler is completed, after many hours of rubbing and fixing shatter cracks it's smooth as a baby's bottom!

Image

Image

What are the rest of you guys up to?


Top
 Profile  
Reply with quote  
 Post subject: Re: Paint guns and parts
PostPosted: 24 Nov 2014, 21:11 
Offline
Member
Member

Joined: 13 Jul 2014, 15:14
Posts: 24
Gender: Male
Well here's a pic of the hatch that I just fixed on my Cordia, with the badge that I got from esky.


Attachments:
rsz_1rsz_wp_000457.jpg
rsz_1rsz_wp_000457.jpg [ 73.09 KiB | Viewed 17055 times ]
Top
 Profile  
Reply with quote  
 Post subject: Re: Paint guns and parts
PostPosted: 24 Nov 2014, 21:37 
Offline
This forum is my life
This forum is my life
User avatar

Joined: 10 Jun 2006, 00:35
Posts: 3644
Location: Adelaide South Australia
Gender: Male
Your car: DOHC 2.3 VR4 85 AB GSR
Immaculate Stock 86 AC GSR
Nice..........rust repair?

Great colour match. :)


Top
 Profile  
Reply with quote  
 Post subject: Re: Paint guns and parts
PostPosted: 24 Nov 2014, 21:52 
Offline
Member
Member

Joined: 13 Jul 2014, 15:14
Posts: 24
Gender: Male
Yeah it was a rust repair, here's a pic of it before. The colour looks good from that angle but it is a little bit darker and more "grayish" in certain light.


Attachments:
rsz_wp_000453.jpg
rsz_wp_000453.jpg [ 118.95 KiB | Viewed 17051 times ]
Top
 Profile  
Reply with quote  
 Post subject: Re: Paint guns and parts
PostPosted: 24 Nov 2014, 21:58 
Offline
This forum is my life
This forum is my life
User avatar

Joined: 10 Jun 2006, 00:35
Posts: 3644
Location: Adelaide South Australia
Gender: Male
Your car: DOHC 2.3 VR4 85 AB GSR
Immaculate Stock 86 AC GSR
You have done well..........now I know why you required the turbo badge........stickers don't like grinders.

Excellent repair, did you use bog or replace the section with a steel insert?


Top
 Profile  
Reply with quote  
 Post subject: Re: Paint guns and parts
PostPosted: 24 Nov 2014, 22:13 
Offline
Member
Member

Joined: 13 Jul 2014, 15:14
Posts: 24
Gender: Male
Thanks mate, I actually used fibreglass to fill in the rust with finishing putty over it. I don't think i'd have the skill to weld it.


Attachments:
rsz_wp_000454.jpg
rsz_wp_000454.jpg [ 92.45 KiB | Viewed 17046 times ]
Top
 Profile  
Reply with quote  
 Post subject: Re: Paint guns and parts
PostPosted: 25 Nov 2014, 01:43 
Offline
Cordia Guru
Cordia Guru
User avatar

Joined: 24 Oct 2009, 18:25
Posts: 324
Gender: Male
Your car: 1987 AC Cordia
N/A DOHC 2.0 4g63

UZZ32 Soarer Active
Build #805/873

UZZ32 Soarer Active
Build #556/873

UZZ31 Soarer Limited
Good to see you're keeping busy Andrew :)

Also M2TC good job, have to learn somewhere as long as you got the rust all out will probably be fine just for the wing only being bog/fiber.



Tomorrow morning I have to swap out the fuel pump on my beast. Its on the blink. New one ready to go sitting on the table ready. :)


Top
 Profile  
Reply with quote  
 Post subject: Re: Paint guns and parts
PostPosted: 25 Nov 2014, 18:50 
Offline
Member
Member

Joined: 03 May 2014, 07:51
Posts: 6
Your car: AB VR4
My spoiler looks amazing Andrew! :)


Top
 Profile  
Reply with quote  
 Post subject: Re: Paint guns and parts
PostPosted: 25 Nov 2014, 22:03 
Offline
Cordia Guru
Cordia Guru
User avatar

Joined: 24 Oct 2009, 18:25
Posts: 324
Gender: Male
Your car: 1987 AC Cordia
N/A DOHC 2.0 4g63

UZZ32 Soarer Active
Build #805/873

UZZ32 Soarer Active
Build #556/873

UZZ31 Soarer Limited
You'll be happy when its on Cluless14, I have one on mine, and it looks fantasic. I have the sides and rear also but theyre not on the car. I kinda like it just on the front, but with the mudflaps and on the rest of the car.


Top
 Profile  
Reply with quote  
 Post subject: Re: Paint guns and parts
PostPosted: 29 Nov 2014, 15:23 
Offline
This forum is my life
This forum is my life
User avatar

Joined: 10 Jun 2006, 00:35
Posts: 3644
Location: Adelaide South Australia
Gender: Male
Your car: DOHC 2.3 VR4 85 AB GSR
Immaculate Stock 86 AC GSR
I'm so loving this cheap spray gun, I have now painted my grille and passenger mirror with both colour and clear.

I picked up a REALLY straight rear valance and will replace it on the AC.......not too happy with the one that's on it.

Here is how the parts look, very happy with the result, will just need a polish rather than a cut with 1200 and polish.

Image

Image

Here is the drivers mirror I'm currently working on...........got I hate the retaining springs!

Need to make one out of two as one of them is broken. *grrrrr*

Image


Top
 Profile  
Reply with quote  
 Post subject: Re: Paint guns and parts
PostPosted: 06 Dec 2014, 15:38 
Offline
This forum is my life
This forum is my life
User avatar

Joined: 10 Jun 2006, 00:35
Posts: 3644
Location: Adelaide South Australia
Gender: Male
Your car: DOHC 2.3 VR4 85 AB GSR
Immaculate Stock 86 AC GSR
Spent today replacing the rear valance for the newly painted one, I know I'm fussy but I didn't like seeing the edge of the panel from the rear of the car.

Image

Here is the car with the replacement valance, I only polished the panel, no sandpaper cutting involved.

Image

Bumper added........the lines are perfect now and I'm happy again. ;)

Image

Didn't notice this "slight" rise in the bumper when I repaired it............Oh well, I'll be on the lookout for yet another one.

Image

Happy motoring!!!


Top
 Profile  
Reply with quote  
 Post subject: Re: Paint guns and parts
PostPosted: 14 Dec 2014, 19:17 
Offline
This forum is my life
This forum is my life
User avatar

Joined: 10 Jun 2006, 00:35
Posts: 3644
Location: Adelaide South Australia
Gender: Male
Your car: DOHC 2.3 VR4 85 AB GSR
Immaculate Stock 86 AC GSR
Bogged up the original bumper.........it was pretty wavy on the drivers side.........turned out a treat.

Now to remove the inner panels again and swap them over!!

Image

Image


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ] 

All times are UTC + 10 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 14 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Connect with Cordia Power on Facebook. Cordia Power 2000-2020. Cordia Forum powered by phpBB.